Abstract:A nanoscale Li+ conductive interlayer Li1.175Nb0.645Ti0.4O3 is coated at the LiCoO2 surface and used in sulfide‐based all solid‐state lithium batteries (ASSLBs). With better σLi+ and microscopic segregation of Ti and Nb during the cycling process, the interlayer stabilizes the cathode lattice and simultaneously mitigates the side reactions. Therefore, ASSLBs can cycle under 4.5 V and show excellent cyclability and rate performance. To implement the growing requirement for higher energy density all‐solid‐state lithium batteries (ASSLBs), further increasing the working voltage of LiCoO2 (LCO) is a key to breaking through the bottleneck. However, LiCoO2 severe structural degradation and side reactions at the cathode interface obstruct the development of high‐voltage sulfide‐based ASSLBs (≥4.5 V). Herein, a nano‐metric Li1.175Nb0.645Ti0.4O3 (LNTO) coated LCO cathode where microscopic Ti and Nb segregation at the interface during cycling potentially stabilizes the cathode lattice, and minimizes side reactions, simultaneously, is designed. Advanced transmission electron microscopy reveals that the stable spinel phase minimizes the micro stress at the cathode interface, avoids structure fragmentation, and hence significantly enhances the long‐term cyclic stability of LNTO@LCO @ 4.5 V. Moreover, the differential phase contrast scanning transmission electron microscopy (DPC‐STEM) visualizes the nano‐interlayer LNTO to boost Li+ migration at the cathode interface. Electrochemical impedance spectroscopy (EIS) reveals that sulfide‐based cells with the LNTO nano‐layer effectively reduce the interfacial resistance to 140 Ω compared to LiNbO3 (235 Ω) over 100 cycles. Therefore, 4.5 V sulfide‐based ASSLBs offer gratifying long‐cycle stability (0.5 C for 1000 cycles, 88.6%), better specific capacity, and rate performance (179.8 mAh g–1 at 0.1 C, 97 mAh g–1 at 2 C).

Dual‐Function Modifications for High‐Stability Li‐Rich Cathode Toward Sulfide All‐Solid‐State Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Dual-functional interfaces for highly stable Ni-rich layered cathodes in sulfide all-solid-state batteries

Sulfuration of Li‐Rich Mn‐Based Cathode Materials for Multianionic Redox and Stabilized Coordination Environment

"Win‐Win" Modification of LiCoO2 Enables Stable and Long‐Life Cycling of Sulfide‐Based All Solid‐State Batteries

Dual-doping for enhancing chemical stability of functional anionic units in sulfide for high-performance all-solid-state lithium batteries

Surface Engineering Strategy Enables 4.5 V Sulfide-Based All-Solid-State Batteries with High Cathode Loading and Long Cycle Life

Multi-strategies interface and structure design of Li- and Mn-rich layered oxide for all-solid-state lithium batteries

Manipulating Charge‐Transfer Kinetics of Lithium‐Rich Layered Oxide Cathodes in Halide All‐Solid‐State Batteries

Binary anion and cation co-doping enhance sulfide solid electrolyte performance for all-solid-state lithium batteries

Slurry-Coated LiNi0.8Co0.1Mn0.1O2-Li3InCl6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries.

Surface Coating Enabling Sulfide Solid Electrolytes with Excellent Air Stability and Lithium Compatibility

Self‐Sacrificing Reductive Interphase for Robust and High‐Performance Sulfide‐Based All‐Solid‐State Lithium Batteries

Regulating p‐Band Center of Sulfur in Li‐Argyrodite to Stabilize Dual Solid–Solid Interface for Robust All‐Solid‐State Lithium–Sulfur Battery

Eliminating interfacial O-involving degradation in Li-rich Mn-based cathodes for all-solid-state lithium batteries.

Microscopic Segregation Dominated Nano‐Interlayer Boosts 4.5 V Cyclability and Rate Performance for Sulfide‐Based All‐Solid‐State Lithium Batteries

Dendrite-Free Li5.5PS4.5Cl1.5-Based All-Solid-State Lithium Battery Enabled by Grain Boundary Electronic Insulation Strategy through In Situ Polymer Encapsulation

High-rate and durable sulfide-based all-solid-state lithium battery with in situ Li2O buffering

Bidirectionally Compatible Buffering Layer Enables Highly Stable and Conductive Interface for 4.5 V Sulfide‐Based All‐Solid‐State Lithium Batteries

Enhanced all-solid-state battery performance through in-situ construction of interface modification layer

Bulk and interface-strengthened Li7P2.9Sb0.1S10.65O0.15I0.2 electrolyte via dual-source doping for all-solid-state lithium-sulfur batteries