Abstract:Versatile, in situ sensing and continuous monitoring capabilities are critically needed, but challenging, for components made of solid woven carbon fibers in aerospace, electronics, and medical applications. In this work, we proposed a unique concept of integrated sensing technology on woven carbon fibers through integration of thin-film surface acoustic wave (SAW) technology and electromagnetic metamaterials, with capabilities of noninvasive, in situ, and continuous monitoring of environmental parameters and biomolecules wirelessly. First, we fabricated composite materials using a three-layer composite design, in which the woven carbon fiber cloth was first coated with a polyimide (PI) layer followed by a layer of ZnO film. Integrated SAW and metamaterials devices were then fabricated on this composite structure. The temperature of the functional area of the device could be controlled precisely using the SAW devices, which could provide a proper incubation environment for biosampling processes. As an ultraviolet light sensor, the SAW device could achieve a good sensitivity of 56.86 ppm/(mW/cm2). On the same integrated platform, an electromagnetic resonator based on the metamaterials was demonstrated to work as a glucose concentration monitor with a sensitivity of 0.34 MHz/(mg/dL).The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssensors.0c00948?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssensors.0c00948</a>.FEA simulation to evaluate the heat transfer in the SAW device (Figure SI1); I–V curves of the SAW device with the wavelength of 64 μm under different intensities of the UV illumination (Figure SI2) (<a class="ext-link" href="/doi/suppl/10.1021/acssensors.0c00948/suppl_file/se0c00948_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Room-Temperature Selective-Metallization Processes Applied to 3-D-Printed and Flexible Materials for Wireless Sensing

A Flexible Foldable Broadband Metamaterial Absorber Fabricated by Intaglio Printing Technology

Application of 3D and 4D Printing in Electronics

Room-temperature high-precision printing of flexible wireless electronics based on MXene inks

Printed, flexible, compact UHF-RFID sensor tags enabled by hybrid electronics

Flexible and Stretchable Liquid‐Metal Microfluidic Electronics Using Directly Printed 3D Microchannel Networks

Printing Three‐Dimensional Refractory Metal Patterns in Ambient Air: Toward High Temperature Sensors

Fully Printed Flexible Single-Chip RFID Tag with Light Detection Capabilities

Integration of 2D Material-Based Electronic Devices on Flexible Substrates for Millimeter Wave Applications

Projection Stereolithography 3D Printing High-Conductive Hydrogel for Flexible Passive Wireless Sensing

Flexible and Integrated Sensing Platform of Acoustic Waves and Metamaterials based on Polyimide-Coated Woven Carbon Fibers

Optically Transparent and Flexible Radio Frequency Electronics through Printing Technologies

Textile-Based Inkjet-Printed RFIDs: Exploring wearable antennas in the real world [Bioelectromagnetics]

Fabrication and characterization of Fused Deposition Modeling 3D printed mm-scaled metasurface units

Cost‐Effective Conductive Paste for Radiofrequency Devices Using Carbon‐Based Materials

Flexible and Fully Printed Passive RF Resonators for Contact‐Less Solution Sensing

Autocatalytic Metallization of Fabrics Using Si Ink, for Biosensors, Batteries and Energy Harvesting

Design and Fabrication of a Flexible Gravimetric Sensor Based on a Thin-Film Bulk Acoustic Wave Resonator

All Screen‐Printed, Polymer‐Nanowire Based Foldable Electronics for mm‐Wave Applications (Adv. Mater. Technol. 11/2021)

3D-printed graphene and stretchable antennas for wearable RFID applications

Low-Profile Radio Frequency Pressure Sensor Based on Additive Manufacturing Technology