Abstract:In this paper, we report the pool boiling experimental results for significant enhancements in the boiling heat transfer coefficient (BHTC) and CHF on various microporous surfaces. The microporous surfaces were fabricated by metal (Copper) powder sintering process, and nanostructured porous surfaces were additionally fabricated through the thermal oxidation of the metal porous surfaces. Among the examined substrates, a boiling surface with a thin metal porous layer and millimeter-sized porous pillar structures exhibited optimal boiling performance; the BHTC and CHF of the microporous surface were measured to be approximately 500 % and 270 % higher than those of a smooth reference surface, respectively. We conjecture that the results come from the combined effect of active nucleation site density enhancement, capillary wicking promotion, and separation of liquid-vapor flow paths on the microporous surface with porous pillars. On the other hands, the porous pillar surface with needle-like nanostructures showed the interesting phenomena that can be regarded to the recovery of the boiling regime from transition boiling to nucleate boiling. At the CHF, the temperature increase on the surface was slower than that on the other surfaces. Additionally, at high heat fluxes below the CHF, the overheated surface self-recovered to the nucleate boiling state, indicating the rewetting of local dry spots. We consider that the capillary wicking capability strongly improved by the nanostructures on the surface was presumably responsible for inhibiting the irreversible expansion of local dry spots. From the experimental observations throughout this study, we propose the following key requirements to design an ideal boiling surface: increasing the nucleation site density, ensuring a liquid supply path by capillary wicking, separating the liquid and vapor flow paths, and improving the liquid wettability of the solid surface by forming nanostructures.

Nucleate boiling enhancement of FC-72 on the carbon nanotube buckypaper for two-phase immersion cooling

Thermo-physical properties of water-based single-walled carbon nanotube nanofluid as advanced coolant

Effects of Surface Modification on the Pool Boiling Heat Transfer of MWNTs/water Nanofluids

Pool Boiling Heat Transfer During Quenching in Carbon Nanotube (Cnt)-Based Aqueous Nanofluids: Effects of Length and Diameter of the CNTs

Nanoparticle-Assisted Pool Boiling Heat Transfer on Micro-Pin-Fin Surfaces

An Experimental Study of Boiling Heat Transfer During Quenching of Nanofluids with Carbon Nanotubes of Various Sizes

Hybrid Micro-Nano Structured Thermal Interfaces for Pool Boiling Heat Transfer Enhancement

Quenching boiling of aqueous suspensions with carbon nanotubes

Enhanced pool boiling on micro-nano composited surfaces with nanostructures on micro-pin-fins

Regulated Transient Pool Boiling of Water During Quenching on Nanostructured Surfaces with Modified Wettability from Superhydrophilic to Superhydrophobic

Boiling and quenching heat transfer advancement by nanoscale surface modification

Enhanced Nucleate Pool Boiling by Coupling the Pinning Act and Cluster Bubble Nucleation of Micro-nano Composited Surfaces

Enhanced pool boiling on composite microstructured surfaces with microcavities on micro-pin-fins

Liquid Super‐Spreading Boosted High‐Performance Jet‐Flow Boiling for Enhancement of Phase‐Change Cooling

Composite porous surfaces of microcavities for enhancing boiling heat transfer

Boiling performance enhancement and self-recovery of nucleate boiling regime on micro- and nanostructured porous surfaces

Experimental Study on Cu–Cu–MWCNTs-Hybrid-Nanocomposite Coated Nanostructured Surfaces for Augmenting Pool Boiling Heat Transfer Performance

Wicking Nanofence-Activated Boundary Layer to Enhance Two-Phase Transport in Microchannels

Pool boiling heat transfer of dual-scale porous microchannel for high-power electronics cooling

Enhanced pool boiling heat transfer characteristics on microstructured copper surfaces coated with hybrid nanofluid

Ultrascalable Three-Tier Hierarchical Nanoengineered Surfaces for Optimized Boiling