Abstract:Although end-bearing energy pile foundations subjected to symmetrical thermal cycles have been extensively studied in the laboratory and in the field, the mechanisms underlying the thermo-hydro-mechanical (THM) interactions in floating energy pile groups and rafts, especially when subjected to asymmetrical thermal loads, are not well understood. In this study, an advanced thermo-mechanical bounding surface model was implemented in finite-element (FE) code to investigate the THM interactions of a two-by-two floating energy pile group and pile raft, focusing on asymmetrical thermal cycles. Computed results are compared with published centrifuge model test results in soft clay. It is revealed that the irreversible volumetric contraction of the soil adjacent to the energy piles accumulates with each thermal cycle, resulting in a decrease in the horizontal stress and hence shaft resistance of the floating piles. During thermal cycles, the stress states of the soil around the energy pile shaft and the soil beneath the pile toe approach the critical state line along different paths. The induced temperature in the soil adjacent to the non-energy pile (NEP) is 5°C lower than that in the soil at the energy pile EP1, which is flanked by the other two energy piles EP2 and EP3. Consequently, the induced excess pore pressure in the soil at the NEP is approximately 20% smaller than that in the soil at EP1. The irreversible volumetric soil contraction at the NEP is about half that at EP1, resulting in approximately 45% less toe settlement. The thermally induced ratcheting settlements of the head and toe of the NEP are less than those of the energy piles, resulting in unacceptable ratcheting tilting of the floating energy pile group. However, the excessive tilting can be reduced by the use of a pile raft.

Assessing the foundation of the Trojan Horse Method

Two-step nuclear reactions: The Surrogate Method, the Trojan Horse Method and their common foundations

The Trojan Horse Method: an Indirect Technique in Nuclear Astrophysics

Theory of the Trojan-Horse Method

The Trojan Horse Method: A Nuclear Physics Tool for Astrophysics

Improved Bhs Element in Finite-Element Method Analysis of the Fracture Problem

Efficient Implementation of the Invariant Imbedding T-matrix Method and the Separation of Variables Method Applied to Large Nonspherical Inhomogeneous Particles

An integral methodological framework for the thermo-mechanical analysis and structural integrity assessment of the European TBM sets

Trojan Horse as an indirect technique in nuclear astrophysics. Resonance reactions

An Elasto-Plastic Numerical Analysis of THM Responses of Floating Energy Pile Foundations Subjected to Asymmetrical Thermal Cycles

Updated evidences of the Trojan Horse particle invariance for $^2$H(d,p)$^3$H reaction

Infinite Boundary Elements for Dynamic Problems of 3‐D Half Space

Theory of inclusive breakup cross section for Borromean nuclei within a four-body spectator model

Implementation of a Timoshenko beam within an elastodynamic halfspace modeled by the Wave Based Method

Trojan horse method as surrogate indirect approach to study resonant reactions in nuclear astrophysics

Aca-Accelerated Time Domain Bem for Dynamic Analysis of Htr-Pm Nuclear Island Foundation

Subthreshold resonances and resonances in the $R$-matrix method for binary reactions and in the Trojan Horse method

Exploitation of the geometrical symmetry in the boundary element method with the group representation theory

3-Body Problems, Hidden Constants, Trojans and WIMPs

Seismic Response of 2D Topographic Profiles for Incident SH Waves: Iterative Solution and Comparison of Direct and Indirect BEM

THM Coupling Analysis and High Slope Deformation in A Reservoir