Abstract:Sintering behaviour of ashes from combustion of coal and biomass blends was experimentally investigated with a focus on the effect of ash preparation method. Blends of a Chinese anthracite, Jincheng coal, and two biomass materials, a wheat straw and a pine sawdust, respectively, were subjected to three different ash preparation procedures, namely, a low temperature oxygen plasma ashing device operating at ca 150 degrees C, combustion in a Muffle furnace at 815 degrees C and in a drop tube furnace at 1500 degrees C. The resulting ash samples were then subjected to the sintering temperature measurement using a pressure-drop sintering device, morphological and mineralogical characterisation using scanning electron microscope (SEM) fitted with X-ray energy dispersive spectroscopy (EDS) and X-ray diffractometry analyser (XRD), respectively. For the same coal and biomass blends but different ash preparation methods, the sintering temperatures were always the lowest for the ash samples from the plasma ashing device and the highest from drop tube furnace. SEM imaging showed that the texture of ash samples from the plasma ashing device was irregular, loose and more fibrous, indicating little interactions among the different mineral and inorganic constituents in the individual fuels. The muffle furnace and drop tube furnace ashes were denser and more uniform in shape as the mineral matter and inorganics became fused together. In addition, the drop tube furnace ashes were mostly in spherical-shape, indicating ash melting had occurred during combustion. The XRD analysis revealed that different minerals were present in the ash samples due to different ash preparation temperatures, with high temperature minerals present in the drop tube furnace ash. Biomass addition in the blends lowered the sintering temperature of corresponding ash; the higher the proportion of biomass in the blend, the lower the ash sintering temperature regardless the ashing method. At the same biomass addition ratio, the ash sintering temperature of the blend with the wheat straw addition was lower than that with the pine sawdust addition, because the wheat straw had a higher K and Cl content but lower Ca than the pine sawdust. The EDS and XRD analyses confirmed that the ashes of coal/wheat straw blends contained more K-bearing minerals, while the ashes of the coal/pine sawdust contained more Ca and K-bearing minerals. Both Ca and K-bearing minerals reacted with other minerals in the ash to form low temperature eutectics, leading to the reduction of sintering temperatures of the coal and biomass blends. However, the melting points of the K-containing minerals are higher than the Ca-containing minerals, therefore, the sintering temperatures of ash with the wheat straw addition were lower than those with the pine sawdust addition. (C) 2016 Elsevier Ltd. All rights reserved.

The Ash-Forming Element Migration and Mineral Transformation during the Bamboo Combustion Process

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

Effect of Ash Preparation Method on the Sintering Characteristics of Ashes from Combustion of Coal and Biomass Blends

Study on Ash Fusion Temperature Using Original and Simulated Biomass Ashes

ASH MELTING BEHAVIOR AND MINERAL TRANSITION MECHANISM UNDER GASIFICATION CONDITION

Further Study on Biomass Ash Characteristics at Elevated Ashing Temperatures: the Evolution of K, Cl, S and the Ash Fusion Characteristics.

Effects of Ash Compositions in Zhundong Coal on Its Ash Fusion Behavior and Crystal Phase Transformation

THE PHYSICOCHEMICAL PROPERTIES OF DIFFERENT BIOMASS ASH

Study on the Effect of Molten Ash on the Combustion Process for Biomass

Study on Fusion Characteristics of Biomass Ash

Micro-scale investigation on particle transformations of coal and biomass ashes during different heating conditions

Ash Fusion Characteristics Under Complex Atmosphere in Coal Combustion Process

Particulate Matter Emission and K/S/Cl Transformation During Biomass Combustion in an Entrained Flow Reactor

Iron Transformation and Ash Fusibility During Coal Combustion in Air and O-2/Co2 Medium

Effect of the Ash Melting Behavior of a Corn Straw Pellet on Its Heat and Mass Transfer Characteristics and Combustion Rate

Effect of Element Content Fluctuation on Partial Melting Behavior of Coal Ash Particles

Effect of Temperature and Pressure on the Mineralogical and Fusion Characteristics of Jincheng Coal Ash in Simulated Combustion and Gasification Environments

Ash Fusion Characteristics of Biomass Pellets During Combustion

Experiment and Kinetics Studies on Ash Fusion Characteristics of Biomass/Coal Mixtures During Combustion

Investigation into the fusibility of biomass ashes and their mineral phase transformations at elevated temperatures by using the HT-XRD technique

Ash Fusibility Based on Modes of Occurrence and High-Temperature Behaviors of Mineral Matter in Coals