Abstract:Continuous fiber-reinforced ceramic matrix composites are promising materials for advanced hot end components and safety-critical components of aeronautics and astronautics; however, the difficult-to-process problem of these materials has been one of the technical bottlenecks restricting their high-performance service. The present work proposed a novel high-efficiency, low-damage, and low-abrasive wear processing method based on the chemical properties of the materials, which used lasers to ablate workpieces before grinding—laser-induced ablation-assisted grinding (LIAAG). The material removal mechanism of Cf/SiC composites was investigated by single-grain scratching tests; the grinding performances of LIAAG in terms of grinding force, grinding temperature, surface integrity, abrasive wear, grinding chips were evaluated by a contrast abrasive belt grinding test. It was found that Cf/SiC composites were chemically transformed into relatively loose and homogeneous ablation products (SiO2 and recrystallized SiC) at high laser ablation temperatures, which were easier to remove during grinding. In this case, surface morphologies displayed the microfracture and crushing of carbon fibers and SiC matrixes, and the grinding-induced damages, such as macro fracture, fiber pull-out, interface debonding, were significantly contained. Abrasive belt was primarily worn in micro-adhesion and micro-abrasion, rather than cleavage fracture and the fall-off in traditional grinding. Under optimum parameters, the grinding force, grinding temperature, and average surface roughness of belt grinding were reduced by 47 %, 40 %, and 26 %, respectively. Consequently, the surface integrity was improved greatly, and the abrasive wear was reduced significantly. The work provides a vital high-performance processing method for ceramic matrix composites components.

Jump ablation-based improvement of nanosecond laser processing of SiCp/AA2024 composites

Ablated surface morphology evolution of SiCp/Al composites irradiated by a nanosecond laser

Heterogeneous ablation behavior of SiCf/SiC composite by nanosecond pulse laser

Microstructure evolution and ablation mechanism of SiCf/SiC ceramic matrix composite microgrooves processed by pico-second laser

Significant improvement of machinability of C f /SiC composites through matching laser scanning spacing and abrasive belt grain size

Processing characteristics of C/C composites with nanosecond pulse laser

Multi-pulse femtosecond laser ablation of SiC/SiC composites: Morphological evolution, oxidation mechanisms and component characterization

Investigations on the oxidation behavior and removal mechanism of SiC/SiC composites by multi-pulse femtosecond laser ablation

Laser ablation behavior and mechanism of Cf/SiC–ZrC ultra-high temperature ceramic matrix composite prepared by PIP method

An Efficient High-Quality Cutting Method for Thick SiC f /SiC Ceramic Matrix Composites Using UV Laser Multiline Layered Scanning with Focus Increment Optimization

A novel low-damage and low-abrasive wear processing method of Cf/SiC ceramic matrix composites: Laser-induced ablation-assisted grinding

Laser ablation behavior and mechanism of Cf/C–SiC composites under different laser energy densities

Investigations on the ablation behavior of C/SiC under femtosecond laser

Research on the ablation mechanism and feasibility of UV laser drilling to improve the machining quality of 2.5D SiC/SiC composites

Pulsed Laser Ultrasonic Vibration-Assisted Cutting of SiCp/Al Composites through Finite Element Simulation and Experimental Research

Removal mechanism of 2.5-dimensional carbon fiber reinforced ceramic matrix composites processed by nanosecond laser

Laser ablation of SiC/SiC ceramic matrix composites: Morphological characterization, component evolution and oxidation mechanisms

Effect of SiC/SiC composites density on nanosecond-laser machining behaviors

Laser-assisted grinding of RB-SiC composites: Laser ablation behavior and mechanism

Investigation on the impact of thermal softening effect induced by nanosecond pulsed laser-assisted cutting on the deformation mechanism of SiCp/Al composites

The Effects of Laser Parameters and the Ablation Mechanism in Laser Ablation of C/SiC Composite