Abstract:This paper explores the optimization of Tungsten-Inert-Gas (TIG) welding process parameters for creating a hybrid structure of Aluminium 6061 and Stainless Steel 304 using a copper filler rod (ER-Cu). The Welding of these two materials has industrial relevance owing to its weight reduction capabilities and environmental benefits. However, Aluminium and Stainless-Steel have different melting points and thermal properties. Aluminium has twice coefficient of thermal expansion and six times coefficient of thermal conductance as compared to Stainless-Steel. This difference often results in residual stresses and brittle intermetallic compounds in the weld region. We have chosen the Welding Current, Welding Speed, and Gas Flow Rate as input parameters, and Ultimate Tensile Strength (UTS) and Micro-hardness as response parameters. We have employed the Response Surface Methodology (RSM) using a Box-Behnken design to evaluate the influence of input parameters on UTS and Micro-hardness. Furthermore, an Analysis of Variance (ANOVA) is conducted to determine the input parameters' significance on the response parameters. Our surface plots demonstrate that UTS improves with increased Welding Current and reduced Welding Speed. Simultaneously, Micro-hardness increases with elevated Welding Speed and decreased current, up to a specific limit. The peak value of UTS (79 MPa) was observed with a Current range of 85-90 A, Speed range of 95-100 mm/min, and Gas Flow Rate of 14.5-15 l/min. On the other hand, maximum Micro-hardness (260HV) was obtained with a Current range of 80-85 A, Speed range of 105-110 mm/min, and Gas Flow Rate of 14.5-15 l/min. This research contributes to improving the manufacturing process of hybrid structures, specifically by optimizing the advantages of both Aluminium and Stainless Steel while addressing the challenges that arise during their combination. The study's conclusions have major consequences for sectors looking to take advantage on the mutually beneficial characteristics of different metals in welding applications.

Investigation of Aluminium Alloy and Aluminium Alloy Using MIG Welding Process

Weldability Investigation and Optimization of Process Variables for TIG-Welded Aluminium Alloy (AA 8006)

MIG and CMT brazing of aluminum alloys and steel: A review

Optimization of Process Parameters in MIG Welding of Two Dissimilar Materials

Investigating parametric effects during TIG welding of dissimilar metals

Study and Characterization of EN AW 6181/6082-T6 and EN AC 42100-T6 Aluminum Alloy Welding of Structural Applications: Metal Inert Gas (MIG), Cold Metal Transfer (CMT), and Fiber Laser-MIG Hybrid Comparison

Study and effect of GTAW parameters on mechanical properties of aluminium dissimilar welded joints: optimization technique

Effect of Current on the Microstructural and Mechanical Properties of Mig Welded Aa6061 Aluminum Alloy

Experimental investigation and optimization of mechanical properties on combination of higher and lower strength of aluminum alloys

Studies on the Quality of Joints and Phenomena Therein for Welded Automotive Components Made of Aluminum Alloy—A Review

Effect of Current on Mechanical Properties and Microstructure of Aluminum 6061 with Gas Tungsten Arc Welding Process

Influences of pulsed current tungsten inert gas welding parameters on the tensile properties of AA 6061 aluminium alloy

Various welding processes for joining aluminium alloy with steel: Effect of process parameters and observations–a review

Effect of pulsed metal inert gas (pulsed-MIG) and cold metal transfer (CMT) techniques on hydrogen dissolution in wire arc additive manufacturing (WAAM) of aluminium

Tungsten inert gas (TIG) and metal inert gas (MIG) welding applications - critical review

Optimising the quality of several welds in a metal-inert gas arc joining of AA6082 and AA7075 using the grey-based Taguchi technique

Process Optimization, Microstructure and Mechanical Properties of Wire Arc Additive Manufacturing of Aluminum Alloy by Using DP-GMAW Based on Response Surface Method

A critical review on mechanical and microstructural properties of dissimilar aluminum (Al)-magnesium (Mg) alloys

ALUMINUM ALLOY WELDING IN AUTOMOTIVE INDUSTRY

Mathematical modeling and optimization of friction stir welding process parameters for armor-grade aluminium alloy

Aluminum alloy and galvanized steel CMT weld joints for lightweight automobile applications