Abstract:Mechanical property testing, spectral analysis, phase analysis, scattering evaluation and mechanism research of CFRP under various temperature and moisture composite environments. Temperature and moisture are important environmental conditions governing the usage of carbon fiber‐reinforced plastics (CFRP). In this study, tensile, compression, and shear tests of woven CFRP composites were conducted in four composite environments: cold‐temperature dry state, room‐temperature dry state, elevated‐temperature dry state, and elevated‐temperature wet state. Fourier transform infrared (FTIR) spectroscopy was used to analyze the molecular composition and structure under these environments. The fracture morphology was also analyzed using scanning electron microscopy (SEM) to understand the deterioration mechanism of the material properties at the macro and micro scales. Finally, a two‐parameter Weibull statistical model was used to evaluate the scattering of the composites. The results demonstrate that the tensile, compressive, and shear properties of the material decrease under harsh conditions, and the degradation effect on the ultimate strength is much greater than that of the modulus. Cold‐temperature dry and elevated‐temperature wet conditions are particularly severe. Composite environments significantly affect the macroscopic failure process and ultimate failure mode of materials. In general, the temperature and humidity of the matrix system acts at the core of the deterioration mechanism of composites, affecting the properties of the fiber/matrix and orthogonal woven fiber interfaces, and eventually resulting in a loss of their constitutive strength and bearing capacity. The theoretical ultimate strength were consistent with the experimental values. Highlights Comprehensive mechanical property testing in multiple composite environments. Degradation mechanisms were revealed from multiscale morphology analysis. Scattering of composites were evaluated using statistical analyses. Cold temperature dry and elevated temperature wet were the worst states. Deterioration effect of environment on matrix and interface is the core failure mechanism.

The effects of temperature on compressive responses and failure behaviors of composite Y‐frame cores sandwich structure

The three-point bending responses of carbon fiber composite sandwich beams with Y-frame cores at high and low temperatures

The indentation responses of composite Y‐type cores sandwich structure under various temperatures

The effects of temperature and hygrothermal aging on the properties of CF/PA6 composite and its compression failure mechanisms

Mode I Interfacial Fracture Characterization of Foam Core Sandwich Materials at Elevated Temperatures

Effects of temperature and strain rate on impact compression behaviors of three-dimensional carbon fiber/epoxy braided composites

Dynamic In-Plane Shear Mechanical Behavior of Carbon Fiber/Epoxy Composite at Different Temperatures

Effects of space environment temperature on the mechanical properties of carbon fiber/bismaleimide composites laminates

Effect of temperature and moisture composite environments on the mechanical properties and mechanisms of woven carbon fiber composites

Effects of temperature and humidity on interfacial properties of composite sandwich structures

Mode II Interfacial Fracture Characterization of Foam Core Sandwich Materials at Elevated Temperatures: the Effects of Frictional Stresses Between the Crack Edges

On-axis and Off-Axis Compressive Behavior of Pultruded GFRP Composites at Elevated Temperatures

Evolution of strain-rate dependent compressive failure behavior of ceramifiable FRP composites at high temperature conditions

Experimental investigation of temperature effects on the tensile behavior of composite‐aluminum four‐nail bolted joints

Internal shear damage evolution of CFRP laminates ranging from -100°C to 100°C using in-situ X-ray computed tomography

The temperature effect on the inter-laminar shear properties and failure mechanism of 3D orthogonal woven composites

Effect of Temperature and Thermal Cycles on the Mechanical Behavior of Sandwich Structure with Entangled Metallic Wire Mesh

Finite Element Analysis of Bearing Performance of Concrete-filled Steel Tube Composite Frame under Thermal and Mechanical Coupling

Compression Shear Properties of Adhesively Bonded Single-Lap Joints of C/C Composite Materials at High Temperatures

Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites

In-plane compressive responses and failure behaviors of composite sandwich plates with resin reinforced foam core