Abstract:This work presents a combined numerical and experimental approach to characterize the macroscopic transport and acoustic behavior of foam materials with a membrane cellular structure. A direct link between the sound absorption behavior of a membrane foam-based layer and its local microstructural morphology is also investigated. To this regard, we first produce a set of foam samples having the same density and the same monodisperse pore size but different values of the closure rate of the windows separating the foam pores. Then, the morphology of pore connectivity with membranes is measured directly on SEM together binocular images. The obtained morphological information is used to reconstruct the representative unit cell for computational performance. The knowledge of the computational model of acoustic porous materials obtained by a hybrid approach based on the scaling laws and the semi-phenomenological JCAL model. For validation purpose, the numerical simulations are further compared with the experimental data obtained from a set of three-microphone tube tests, a very good agreement is observed. In acoustic terms, the obtained results point out that for the given high porosity and cell size, we can archive a high sound absorbing ability of based-foam layer by controlling the membrane level at a range of 45-85$\%$. To elaborate these foams, a gelatin concentration in a range of 14-18$\%$ should be used in the foam making process. In addition, we can obtain for instance the peak and the average values of acoustic absorption of a foam layer in a specific frequency range of interest by varying its membrane content. Methodologically, our work proposes (i) a systematic approach to characterize directly macroscopic properties from the local microstructure, and (ii) a manufacturing technique that can be used to make foams with the desired microstructure.

Evaluation of a local acoustic resonance method for coating thickness determination on stochastic metal hybrid foams

Remanent Magnetic Field Scanning of Coating‐graded Hybrid Foams

Acoustoelastic determination of local surface stresses in polymethylmethacrylate

Analysis of the meso‐mechanical deformation behavior of Al foams and Ni/Al hybrid foams using time‐lapse μCT measurements and 3D Optical Flow

Local deformation on damping performance of integral-forming aluminum foam sandwich

Stochastic mechanical modeling of metallic foams to determine onset of mesoscale behavior

Development of EN AW-6082 Metal Foams and Stochastic Foam Modeling for the Individualization of Extruded Profiles

Use of Torsional Acoustic Resonators for Microweighing, Polymer Rheology, and Monitoring of Biofilm Formation

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Achievement of acoustical properties of foam materials by tuning membrane level: Elaborations, models and experiments

Homogenized and Localized Responses of Coated Magnetostrictive Porous Materials and Structures

Multi-Scale Modeling for Predicting the Stiffness and Strength of Hollow-Structured Metal Foams with Structural Hierarchy

Gaussian-Based Machine Learning Algorithm for the Design and Characterization of a Porous Meta-Material for Acoustic Applications

Sound Absorption and Transmission Loss Properties of Open-Celled Aluminum Foams with Stepwise Relative Density Gradients

Acoustic-pressure-assisted engineering of aluminium foams

Mechanical and Microstructural Assessment of Inhomogeneities in Oxide Ceramic Matrix Composites Detected by Air-Coupled Ultrasound Inspection

Acta Polytechnica

Investigation of frequency dependent mechanical properties of porous materials using dynamic mechanical analyzer and frequency-temperature superposition theory

A Novel High-Frequency Ultrasonic Approach for Evaluation of Homogeneity and Measurement of Sprayed Coating Thickness

Nonlinear acoustic characterization of heterogeneous plasticity in bent aluminium samples

Development of a novel in-situ measurement method for thermo-mechanically coupled material characterization of high-strength aluminum alloys