Abstract:The fatigue performance of metal matrix composites (MMCs) is highly related to their surface integrity due to the intensive tool-particle interactions and metallographic alterations of matrix, especially under extreme cutting parameters, which could largely result in surface morphologic defects and subsurface damage on the components. Although the fatigue performance of bulk MMCs has been extensively studied, the influence of machining-induced surface anomalies on the fatigue failure mechanism still needs to be understood. This paper investigates the effect of two distinct surface integrities induced by two cutting regimes (ductile, and semi-brittle regime) on the fatigue performance of MMCs. The ductile and semi-brittle regime were represented by different surface integrities regarding the particle behaviours and their effect on the mechanical and metallographic alterations of matrix materials. In-depth analysis in terms of surface topography, subsurface damage, and residual stresses of the machined workpieces has been carried out before the three-point bending fatigue test. The results showed that the samples machined by finish milling (very low feed – semi-brittle regime) unexpectedly presented lower fatigue lives compared to the rough-milled counterparts (high feed – ductile regime), despite the former displayed compressive residual stress and lower surface roughness. It was found that the particles have pronounced influence on the fatigue performance in two different ways: under low cycle fatigue, the particles were prone to be fractured by the high stress applied (which accelerated the formation of crack initiations and therefore shortened the fatigue life), while under high cycle fatigue, the reinforcement particles were not fractured and instead they could inhibit the crack growth up to some extent. Therefore, fatigue lives of the rough-milled samples (high feed – ductile regime) were enhanced due to the retardation of reinforcement particles.

Effect of machined surface integrity on fatigue resistance of aluminum-silicon alloy ZL109

Surface integrity enhancement of ZL109 aluminum-silicon piston alloy employing the forward and reverse finish cutting method

Adjusting machined surface integrity of aluminum–silicon alloy through step-by-step feed cutting and multi-step finish cutting method

Effect of surface integrity on fatigue life of 7075-T6 aluminum alloy by combination of fine turning with hydrostatic deep rolling

Fretting Fatigue Behavior and Damage Mechanism of Cast Al-Si-Cu-T6 Alloy Under Two Surface Roughness conditions

Effect of milling surface topography and texture direction on fatigue behavior of ZK61M magnesium alloy

CHARACTERIZATION OF SURFACE, SUBSURFACE DAMAGE AND THEIR EFFECT ON FATIGUE LIFE AFTER MACHINING OF AEROSPACE-GRADE ALUMINUM ALLOY (Al 6082-T6)

Towards the understanding the effect of surface integrity on the fatigue performance of silicon carbide particle reinforced aluminium matrix composites

Fatigue tests and damage model development on Al-Si-Mg aluminum alloys with low-velocity impact pit

Fatigue tests and a damage mechanics-based fatigue model on a cast Al-Si-Mg aluminum alloy with scratches

STUDY ON SURFACE INTEGRITY AND ITS INFLUENCE ON HIGH TEMPERATURE FATIGUE BEHAVIOR WHEN TURNING POWDER METALLURGY NI-BASED SUPERALLOY

Low cycle fatigue response and fracture mechanism in a novel Al-3.5Si-0.5Mg-0.4Cu casting alloy

The Influence of Milling Induced Residual Stress on Fatigue Life of Aluminum Alloys

Fatigue life analysis for 6061-T6 aluminum alloy based on surface roughness

Improving fatigue properties of normal direction ultrasonic vibration assisted face grinding Inconel 718 by regulating machined surface integrity

High Cycle Fatigue Performance of AlSi10mg Alloy Produced by Selective Laser Melting

Role of defects on the high cycle fatigue behavior of selective laser melted Al–Mg–Sc–Zr alloy

Influence of Grain Refinement and Microstructure on Fatigue Behavior for Solid-State Additively Manufactured Al-Zn-Mg-Cu Alloy

Research status of influence mechanism of surface integrity on fatigue behavior of metal workpieces: a review

STUDY ON FATIGUE PERFORMANCE OF GZL AI ALLOY

Experimental Characterization of Competition of Surface and Internal Damage in Very High Cycle Fatigue Regime