Abstract:ABSTRACTThe cyclotrimerization of methylene diphenyl 4,4‐diisocyanate (MDI) and 3‐isopropenyl‐α,α′‐dimethylbenzene isocyanate (TMI) was applied on the bead/membrane surfaces of a polypropylene (PP)‐bearing isocyanate group to synthesize a protective networked polymer. Chemical structures of these molecules were characterized through attenuated total reflectance–Fourier transform infrared spectroscopy. Results showed that the absorption peak of isocyanate group at 2255 cm−1 became negligible after the reaction was completed. The absorption peaks of the isocyanurate groups appeared simultaneously at 1600 cm−1 and at 1510–1560 cm−1; this result indicated that the grafted isocyanates were almost consumed, thereby forming isocyanurates. Energy X‐ray dispersive spectroscopy revealed that oxygen content increased; indeed, isocyanurate was formed on the PP surface. Pure PP beads, PP‐g‐TMI, and cyclotrimerization products were also subjected to thermal property tests to investigate their corresponding thermal stabilities. Cyclotrimerization could result in the increase in PP‐grafted decomposition temperature, even slightly higher than pure PP. Rheological behavior in oscillatory flow was also evaluated; the storage modulus, loss modulus, and complex viscosity of cyclotrimerization products were higher than those of the PP‐grafted membranes. Surface morphology was further observed through field‐emission scanning electron microscopy and atomic force microscopy. The cyclotrimerization products contained blocks and exhibited a rough surface. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43327.

Quantitative trap analysis of grafting-modified polypropylene based on thermally stimulated depolarization current

Deep Trap Origins, Characteristics, and Related Mechanisms in Chemically Grafted Polypropylene with Enhanced Direct Current Volume Resistivity

Study on Melt-Grafting of Maleic Anhydride Onto Polypropylene in the Presence of Styrene

Determination of Trap Energy in Polyethylene with Different Aging Status by Molecular Dynamics and Density Function Theory

Origins and effects of deep traps in functional group grafted polymeric dielectric materials

The Dielectric Properties of Polypropylene Grafting with Methyl Methacrylate

Charge Trap Depth Prediction of Grafted Polypropylene System Using Machine Learning

An Electron and Hole Trap Energy Distribution Estimation Model and Its Application in Polypropylene Nanocomposites

THE STUDY OF APPLIED BEHAVIOR OF PP/PA6 BY USING GRAFTED POLYPROPYLENE AS COMPATILIZER

Properties of Grafting Methyl Acrylate on Charge Transport in Polypropylene

Analysis of Influence of Trap Introducing Methods on Polymer Insulation Properties

Quasi-Hydrogen Bond and Charge-Trapping Effect Originating from Polar Side Group Lead to Significantly Suppressed Charge Transport in Polypropylene

Characterization of a Poly(propylene-g-styrene) Graft Copolymer by Temperature Rising Elution Fractionation

Thermal, mechanical, and morphological studies of a depolymerizable graft copolymer thermoplastic

CRYSTALLIZATION BEHAVIOR OF GMA/St MULTIMONOMER GRAFTEDPOLYPROPYLENE

Photo-Induced Graft Polymerization of Acrylamide on Polypropylene Membrane Surface in the Presence of Dibenzyl Trithiocarbonate

The Effect of Tunable Modification Parameters on the Structure and Properties of Polypropylene with Cyclotrimerization Surface of Isocyanates

Improved High-Temperature Electrical Properties of Polymeric Material by Grafting Modification

Synthesis of PP-g-MAH Via Solid Grafting with a Quantitative Express Method for Analyzing MAH Content

Surface Functionalization Of Polypropylene-Bearing Isocyanate Groups In Solid State And Their Cyclotrimerization With Diisocyanates

Effect of Tea Polyphenols on the Melt Grafting of Glycidyl Methacrylate onto Polypropylene