Abstract:Commercial supercapacitors using available carbon products have long been criticized for the under-utilization of their prominent specific surface area (SSA). In terms of carbonaceous electrode optimization, excessive improvement in SSA observed in the gaseous atmosphere might have little effect on the final performance because cracked/inaccessible pore alleys considerably block the direct electrolyte ion transport in a practical electrochemical environment. Herein, mesopore-adjustable hierarchically porous carbon nanosheets are fabricated based on a micelle-size-mediated spatial confinement strategy. In this strategy, hydrophobic trimethylbenzene in different volumes of the solvent can mediate the interfacial assembly with a carbon precursor and porogen segment through pi-pi bonding and van der Waals interaction to yield micelles with good dispersity and the diameter varying from 119 to 30 nm. With an increasing solvent volume, the corresponding diffusion coefficient (3.1-14.3 m(2) s(-1)) of as obtained smaller micelles increases, which makes adjacent micelles gather rapidly and then grow along the radial direction of oligomer aggregates to eventually form mesopores on hierarchically porous carbon nanosheets (MNC150-4.5). Thanks to the pore expansion effect of trimethylbenzene, the mesoporous volume can be adjusted from 28.8 to 40.0%. Mesopores on hierarchically porous carbon nanosheets endow MNC150-4.5 with an enhanced electrochemically active surface area of 819.5 m(2) g(-1), which gives rise to quick electrolyte accessibility and a correspondingly immediate capacitive response of 338 F g-1 at 0.5 A g(-1 )in a three electrode system. Electrolyte transport through pathways within MNC150-4.5 ultimately enables the symmetric cell to deliver a high energy output of 50.4 Wh kg-1 at 625 W kg-1 in a 14 m LiOTF electrolyte and 95% capacitance retention after 100,000 cycles, which show its superior electrochemical performance over representative carbon-based supercapacitors with aqueous electrolytes in recent literature.

Molten salt method derived porous carbon with high energy density in KI-additive electrolyte

Facile Construction Of Highly Redox Active Carbons With Regular Micropores And Rod-Like Morphology Towards High-Energy Supercapacitors

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

Improving the Pore-Ion Size Compatibility Between Poly(ionic Liquid)-Derived Carbons and High-Voltage Electrolytes for High Energy-Power Supercapacitors

Cooking Carbon with Protic Salt: Nitrogen and Sulfur Self-Doped Porous Carbon Nanosheets for Supercapacitors

Adapting a Kinetics-Enhanced Carbon Nanostructure to Li/Na Hybrid Water-in-Salt Electrolyte for High-Energy Aqueous Supercapacitors

Porous Carbon Globules with Moss-Like Surfaces from Semi-Biomass Interpenetrating Polymer Network for Efficient Charge Storage

Spatial Confinement Strategy for Micelle-Size-Mediated Modulation of Mesopores in Hierarchical Porous Carbon Nanosheets with an Efficient Capacitive Response

Polytetrafluoroethylene-assisted removal of hard-template to prepare hierarchically porous carbon for high energy density supercapacitor with KI-additive electrolyte

Porous carbons originated from gelatin through molten salt templating in conjunction with chemical activation for ultracapacitors

Bimolecular Salt Strategy Enhances Heteroatom Doping and Porosity Optimization of Porous Carbon for Supercapacitors

One-pot molten salt-assisted synthesis of nitrogen-doped mesoporous carbon for high energy density supercapacitors

Hierarchically Porous Carbon Derived from an Aqueous Curable Composition for Supercapacitors

N/O Co-doped Porous Carbon with Controllable Porosity Synthesized via an All-in-One Step Method for a High-Rate-Performance Supercapacitor

Molten Salt-Confined Construction of Nitrogen-Doped Hierarchical Porous Carbon for High-Performance Supercapacitors

Molten salt assisted self-activated carbon with controllable architecture for aqueous supercapacitor

In-Situ Molten Salt Template Strategy For Hierarchical 3d Porous Carbon From Palm Shells As Advanced Electrochemical Supercapacitors

Biomass-derived carbon prepared through a quadruple-functional-salt approach for application in K-ion capacitors

Molten Salt Synthesis of Nitrogen and Oxygen Enriched Hierarchically Porous Carbons Derived from Biomass Via Rapid Microwave Carbonization for High Voltage Supercapacitors

From salt-filled ZIF-8 to open-door nanoporous carbon with optimized pore system for electrochemical supercapacitor with enhanced energy density

Water-in-salt electrolyte ion-matched N/O codoped porous carbons for high-performance supercapacitors