Abstract:As electrode materials for supercapacitors (SCs), hierarchical porous carbons (HPCs) have attracted tremendous attention due to their high specific surface area (SSA) and hierarchical pore structure. However, the complex template preparation process for HCPs usually brings high cost. Here, by combining the pre-carbonizing process of coal tar pitch (CTP) in eutectic salt (ZnCl2?NaCl, denoted as MZS, Sm260 ?C) with the KOH activating process, HPCs with high capacitive performance have been prepared. The pre-carbonizing process is carried out under atmosphere to obtain the primitive carbon (PC), during which the MZS will not only provide a liquid environment for catalytic cross-linking of CTP but also act as the porogen agent. The effects of temperatures, heating rates, the mass ratio of KOH to PC (mKOH/mC) and the activating temperatures on the structure and capacitive properties of HPCs are explored. The results show that the HPCs prepared by activating the optimal PC (prepared at 560 ?C in the MZS with a heating rate of 2.5 ?C min-1) at temperature of 800 ?C (heating rate of 10.0 ?C min-1 and mKOH/mC ratio of 5) exhibit high specific surface area (2984 m2 g-1), large total pore volume (2.2 cm3 g- 1) and wide pore size distribution. Based on the two-electrode test system, the optimal HCP shows a specific capacitance of 320 F g- 1, the symmetric cells exhibit an energy density of 10.6 Wh kg-1 at power density of 50.1 W kg- 1. Furthermore, the cell displays a good cyclic stability (the capacitance retention of 94.0% after 10,000 cycles). This strategy may be developed as a promising method for preparing high-performance HPC from CTP.

Polytetrafluoroethylene-assisted removal of hard-template to prepare hierarchically porous carbon for high energy density supercapacitor with KI-additive electrolyte

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

Pomelo Peel Derived Hierarchical Porous Carbon as Electrode Materials for High-Performance Supercapacitor

3D hierarchical porous carbon matching ionic liquid with ultrahigh specific surface area and appropriate porous distribution for supercapacitors

Facile and low-cost fabrication of interconnected hierarchically porous carbon for high-performance supercapacitors

Enhanced Energy Density for P-Doped Hierarchically Porous Carbon-Based Symmetric Supercapacitor with High Operation Potential in Aqueous H2SO4 Electrolyte

Hierarchical porous carbon sheets derived on a MgO template for high-performance supercapacitor applications

Easily Prepared Wood–Derived Hierarchically Porous Carbon for High–Performance Supercapacitors

Heteroatoms-doped hierarchical porous carbon with multi-scale structure derived from petroleum asphalt for high-performance supercapacitors

Kelp derived hierarchically porous carbon aerogels with ultrahigh surface area for high-energy-density supercapacitor in aqueous electrolyte

Coal Tar Pitch-Based Hierarchical Porous Carbons Prepared in Molten Salt for Supercapacitors

Fabricating N, P-Codoped Hierarchical Porous Carbons from Lignin via Assembled Templating and Activation Strategy for High-Performance Supercapacitors

Efficient Fabrication of Hierarchical Porous Carbon Fibers with Tunable Mesopores from Discarded Aramid for Supercapacitors

Polymerization-Pyrolysis Assisted Construction of Multiscale Porous Carbon for High-Performance Supercapacitors

Dual-Role Salt-Assisted Construction of Hierarchically Porous Carbon for Supercapacitors with High Energy and Power Density

Oxide-doped hierarchically porous carbon for high-performance supercapacitor

Sustainable Lignin-Derived Hierarchical Porous Carbon for Supercapacitors: A Novel Approach for Holding Electrochemical Attraction Natural Texture Property of Precursor

Nitrogen and Phosphorus Co-doped Porous Carbon for High-Performance Supercapacitors

Synthesis of hierarchically porous boron-doped carbon material with enhanced surface hydrophobicity and porosity for improved supercapacitor performance

Supercapacitor application of a three-dimensional carbon sphere–intercalated porous carbon fabricated using a hard template and a biomass material

Lamellar Hierarchical Porous Carbon Prepared from Coal Tar Pitch Through Lamellar Hard Template Combined with Pre-Carbonization and Activation Method for Supercapacitor