Abstract:Solid oxide fuel cell (SOFC) has experienced a growing interest in the last few decades because of generating energy more efficiently than the conventional combustion of fossil fuels. By using the same material as anode and cathode of symmetric solid oxide fuel cell (SSOFC), the production of reliable and repeatable cells would be simpler. In this work, La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN) has been investigated firstly as potential cathode material for SOFC. The cathode polarization resistances are only 0.1 Ω cm2 at 800 oC. The stability of phase structure, electrode microstructure and polarization resistances for the LSCFN in the atmosphere of air have been studied. Then, LSCFN have been investigated as potential anode material for SOFC. The results show that LSCFN have high catalytic activity in methane catalytic combustion reaction, the total conversion temperature of 1% CH4 using LSCFN as catalyst was as low as 650 oC. The performance of carbon-resistance and sulfur-tolerance in SOFC were studied using LSCFN ceramic anode with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) electrolyte. Long-term operation of such single cell under methane lasted for 120 hours without degradation. The output power density fueled with H2-50 ppm H2S was stable enough in 120 hours’ operation which indicated a good sulfur-tolerant performance. Finally, the maximum power densities generated by the SSOFC cell with LSCFN electrode are 650 mW cm-2 in H2, and the cell maximum power output has demonstrated to be not affected by the redox cycling of the anode during a total of 21 cyclic testing, indicating that the LSCFN has excellent redox stability. All of these results indicate that LSCFN can potentially be a promising candidate for the electrode material of SSOFC.

Evaluation of Strontium Doped Lanthanum Chromium Manganite (LSCM) and Gadolinium Doped Ceria (GDC) Anode with Different Compositions

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Study on durability of novel core-shell-structured La0.8Sr0.2Co0.2Fe0.8O3-δ@Gd0.2Ce0.8O1.9 composite materials for solid oxide fuel cell cathodes

Evaluation of A-site deficient Sr1−xSc0.175Nb0.025Co0.8O3−δ (x=0, 0.02, 0.05 and 0.1) perovskite cathodes for intermediate-temperature solid oxide fuel cells

Nanostructured Lscf-GDC Cathodes Via a Sol–Gel Method for High Performance Solid Oxide Fuel Cells

LSCM-GDC as composite cathodes for high temperature steam electrolysis: Performance optimization by composition and microstructure tailoring

Self-assembly and low-temperature sintered La0.6Sr0.4CoO3-δ @ Gd0.1Ce0.9O2-δ composite cathode with rich electrode/electrolyte interface and enhanced performance in harsh condition

Effect of Gd0.2Ce0.8O1.9 Nanoparticles on the Oxygen Evolution Reaction of La0.6Sr0.4Co0.2Fe0.8O3-δ Anode in Solid Oxide Electrolysis Cell

Synthesis And Characterization Of La0.75sr0.25mn0.5cr0.5-Xcuxo3-Delta For Sofc Anode Material

Conducting Property and Performance Evaluation of LNF As Cathode Current Contact Layer in Solid Oxide Fuel Cell

Chromium tolerance of high entropy BaO impregnated-(La0.2Pr0.2Sm0.2Gd0.2Nd0.2)Ba0.5Sr0.5Co1.5Fe0.5O5(LPSGNBSCF) cathodes for solid oxide fuel cell

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Improving the Stability of La0.6Sr0.4Co0.2Fe0.8O3-δ Electrode for Solid Oxide Fuel Cells by Introducing Sintering Inhibitors

Synthesis and Characterization of La0.75Sr0.25Mn0.5Cr0.5-xCuxO3-δ for SOFC An-ode Material

Sintered powder-base cathode over vacuum-deposited thin-film electrolyte of low-temperature solid oxide fuel cell: Performance and stability

Influence of the La0.2Sr0.7Ti0.95Ni0.05O3 (LSTN) Synthesis Method on SOFC Anode Performance

Low Temperature Co-Sintering of Sr2Fe1.5Mo0.5O6−δ–Gd0.1Ce0.9O2−δ Anode-Supported Solid Oxide Fuel Cells with Li2O–Gd0.1Ce0.9O2−δ Electrolyte

Coking-Resistance and Sulfur-Tolerance Study of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ Anode

Annealing of Gadolinium-Doped Ceria (GDC) Films Produced by the Aerosol Deposition Method

Determination of relevant factors affecting the surface oxygen exchange coefficient of solid oxide fuel cell cathode with ionic conducting oxide coating

Gd 0.2 Ce 0.8 O 1.9 纳米颗粒对固体氧化物电解池La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3- δ 阳极析氧反应的影响