Abstract:Bi2Se3, as a novel 3D topological insulator (TI), is expected to be a strong candidate for next-generation optoelectronic devices due to its intriguing optical and electrical properties. In this study, a series of Bi2Se3 films with different thicknesses of 5-40 nm were successfully prepared on planar-Si substrates and developed as self-powered light position-sensitive detectors (PSDs) by introducing lateral photovoltaic effect (LPE). It is demonstrated that the Bi2Se3/planar-Si heterojunction shows a broad-band response range of 450-1064 nm, and the LPE response is strongly dependent on the Bi2Se3 layer thickness, which can be mainly attributed to the thickness-modulated longitudinal carrier separation and transport. The 15 nm thick PSD shows the best performance with a position sensitivity of up to 89.7 mV/mm, a nonlinearity of lower than 7%, and response time as fast as 62.6/49.4 μs. Moreover, to further enhance the LPE response, a novel Bi2Se3/pyramid-Si heterojunction is built by constructing a nanopyramid structure for the Si substrate. Owing to the improvement of the light absorption capability in the heterojunction, the position sensitivity is largely boosted up to 178.9 mV/mm, which gets an increment of 199% as compared with that of the Bi2Se3/planar-Si heterojunction device. At the same time, the nonlinearity is still kept within 10% as well due to the excellent conduction property of the Bi2Se3 film. In addition, an ultrafast response speed of 173/97.4 μs is also achieved in the newly proposed PSD with excellent stability and reproducibility. This result not only demonstrates the great potential of TIs in PSD but also provides a promising approach for tuning its performance.

Photoelectrochemical photodetector based on electrodeposited Bi2Se3 film with superior performance

High-Performance Broadband Photoelectrochemical Photodetectors Based on Ultrathin Bi2O2S Nanosheets.

High-performance self-powered photodetector based on Bi2O2Se nanosheets

Preparation and Performance Study of Photoconductive Detector Based on Bi2O2Se Film

Ultra-stable, Sensitive and Broadband Photodetector Based on Large-Area 2D Bismuth Oxyselenide Film for Multiband Image Sensing

High-Performance Waveguide-Integrated Bi2O2Se Photodetector for Si Photonic Integrated Circuits.

Thickness modulation of incline-grown Bi2O2Se for the construction of high-performance phototransistors

Boosting Photoresponse of Self-Powered InSe-Based Photoelectrochemical Photodetectors via Suppression of Interface Doping

A High-Performance and Self-Powered Polarization-Sensitive Photoelectrochemical-Type Bi2O2Te Photodetector Based on a Quasi-Solid-state Gel Electrolyte.

Broad‐Band Photoelectrochemical Photodetector Based on Ternary Sb2Te2Se Nanosheets

Direct growth Bi2O2Se nanosheets on SiO2/Si substrate for high-performance and broadband photodetector

Boosting photoresponse and stability of a self-powered photoelectrochemical-type Bi2Te3 imaging photodetector by a novel quasi-solid-state gel electrolyte

Review of 2D Bi2X3 (X = S, Se, Te): from preparation to photodetector

High-Performance Se-Based Photoelectrochemical Photodetectors Via in Situ Grown Microrod Arrays

Bi2S3 Nanoparticles on Bi2MoO6 Nanorods for Applications As Fast-Response Self-Powered Photoelectrochemical Photodetector and Water Splitting

Construction of Bi2O2Se/Bi2Se3 Van Der Waals Heterostructures for Self-Powered and Broadband Photodetectors.

High-Speed Self-Powered PdSe2/Si 2D-3D PIN-like Photodetector with Broadband Response Based on PdSe2 Quantum Island Structure

High sensitivity and fast response infrared detector fabricated with the Bi2Se3-PbSe heterojunction

Self-Powered Bi2Se3/Si Position-Sensitive Detector and Its Performance Enhancement by Introducing a Si Nanopyramid Structure

High-performance Polarization-Sensitive Photodetector Based on a Few-Layered PdSe2 Nanosheet

One-pot synthesized Bi2Te3/graphene for a self-powered photoelectrochemical-type photodetector