Abstract:Purpose - The purpose of this paper is to present an optimal posture evaluation model to control the assembly gaps in aircraft wing assembly. The gaps between two mating surfaces should be strictly controlled in precision manufacturing. Oversizing of gaps will decrease the dimensional accuracy and may reduce the fatigue life of a mechanical product. To reduce the gaps and keep them within tolerance, the relative posture (orientation and position) of two components should be optimized in the assembly process. Design/methodology/approach - Based on the step alignment strategy, i.e. preliminary alignment and refined alignment, the concept of a small posture transformation (SPT) is introduced. In the preliminary alignment, an initial posture is estimated by a set of auxiliary locating points, with which the components can be quickly aligned near each other. In the refined alignment, the assembly gaps are calculated and the formulation of the gaps with component posture is derived by the SPT. A comprehensive weighted minimization model with gap tolerance constraints is established for redistributing the gaps in multi-regions. Powell-Hestenes-Rockafellar optimization, Singular Value Decomposition and K-Dimensional tree searching are introduced for the solution of the optimal posture for localization. Findings - Using the SPT, the trigonometric posture transformation is linearized, which benefits the iterative solution process. Through the constrained model, overall gaps are minimized and excess gaps are controlled within tolerance. Practical implications - This method has been tested with simulated model data and real product data, the results of which have shown efficient coordination of mating components. Originality/value - This paper proposed an optimal posture evaluation method for minimizing the gaps between mating surfaces through component adjustments. This will promote the assembly automation and variation control in aircraft wing assembly.

Online Adaptive Method for Obtaining High-Precision Spherical Joint Positions with the Lower Internal Force Assembly of Large-Scale Aircraft Components

Posture Alignment Internal Force in Three-Axis Actuators Based Assembly System for Large Aircraft Parts

A Multi-Object Posture Coordination Method with Tolerance Constraints for Aircraft Components Assembly

Enhanced Pose Adjustment System for Wing-Box Assembly in Large Aircraft Manufacturing.

A New Principle and Device for Large Aircraft Components Gaining Accurate Support by Ball Joint

An Adaptive Posture Following and Keeping Fixture Based on Aerostatic Bearing and Universal Ball Joint for Aircraft Digital Assembly

An adaptive ball-head positioning visual servoing method for aircraft digital assembly

Modeling and Simulation of Aligning Process for Alignment Mechanism of Large Aircraft Component

An Assembly Gap Control Method Based on Posture Alignment of Wing Panels in Aircraft Assembly

An Adaptive Posture Following and Keeping Fixture and Experiments

Posture Alignment and Joining Test System for Large Aircraft Fuselages

Numerical Study on Predicting and Correcting Assembly Deformation of a Large Fuselage Panel During Digital Assembly

A new method for automatic shaft-hole assembly of aircraft components

Static Stiffness of Three-Axis Actuators Based Posture Alignment System for Large Aircraft Components

Assembly Accuracy Analysis for Small Components with A Planar Surface in Large-Scale Metrology

Modeling and Simulation of Flexible Multi-Body Dynamics for Large Aircraft Components Alignment Mechanism

Joint Measuring and Evaluating Technology for Final Assembly of Aircraft Wing and Fuselage

Estimation and Alignment Method of Wing Position and Orientation for Aircraft Digital Assembly

Posture evaluation method for aircraft component based on hole feature

Accuracy Analysis with Limited Samples During Aircraft Automatic Join-Assembly

Experimental and Numerical Analyses of the Shimming Effect on Bolted Joints with Nonuniform Gaps