Abstract:Purpose - The purpose of this paper is to present an optimal posture evaluation model to control the assembly gaps in aircraft wing assembly. The gaps between two mating surfaces should be strictly controlled in precision manufacturing. Oversizing of gaps will decrease the dimensional accuracy and may reduce the fatigue life of a mechanical product. To reduce the gaps and keep them within tolerance, the relative posture (orientation and position) of two components should be optimized in the assembly process. Design/methodology/approach - Based on the step alignment strategy, i.e. preliminary alignment and refined alignment, the concept of a small posture transformation (SPT) is introduced. In the preliminary alignment, an initial posture is estimated by a set of auxiliary locating points, with which the components can be quickly aligned near each other. In the refined alignment, the assembly gaps are calculated and the formulation of the gaps with component posture is derived by the SPT. A comprehensive weighted minimization model with gap tolerance constraints is established for redistributing the gaps in multi-regions. Powell-Hestenes-Rockafellar optimization, Singular Value Decomposition and K-Dimensional tree searching are introduced for the solution of the optimal posture for localization. Findings - Using the SPT, the trigonometric posture transformation is linearized, which benefits the iterative solution process. Through the constrained model, overall gaps are minimized and excess gaps are controlled within tolerance. Practical implications - This method has been tested with simulated model data and real product data, the results of which have shown efficient coordination of mating components. Originality/value - This paper proposed an optimal posture evaluation method for minimizing the gaps between mating surfaces through component adjustments. This will promote the assembly automation and variation control in aircraft wing assembly.

Static Stiffness of Three-Axis Actuators Based Posture Alignment System for Large Aircraft Components

Posture Alignment Internal Force in Three-Axis Actuators Based Assembly System for Large Aircraft Parts

Enhanced Pose Adjustment System for Wing-Box Assembly in Large Aircraft Manufacturing.

Posture Alignment and Joining Test System for Large Aircraft Fuselages

Posture Alignment for Large Aircraft Parts Based on Three POGO Sticks Distributed Support

Modeling and Simulation of Flexible Multi-Body Dynamics for Large Aircraft Components Alignment Mechanism

An Adaptive Posture Following and Keeping Fixture Based on Aerostatic Bearing and Universal Ball Joint for Aircraft Digital Assembly

A Multi-Object Posture Coordination Method with Tolerance Constraints for Aircraft Components Assembly

Design and Accuracy for POGO Stick with Three-Axis

An Adaptive Posture Following and Keeping Fixture and Experiments

A New Posture Following and Keeping Fixture for Aircraft Assembly

End Stiffness Modeling for Automatic Horizontal Dual-Machine Cooperative Drilling and Riveting System

An Assembly Gap Control Method Based on Posture Alignment of Wing Panels in Aircraft Assembly

Design and Optimization of Flexible Assembly Platform Used for Three Sections Joint

Modeling and Simulation of Aligning Process for Alignment Mechanism of Large Aircraft Component

A New Principle and Device for Large Aircraft Components Gaining Accurate Support by Ball Joint

Analysis and Experimental Test on Dynamic Characteristic of 3-Axis Positioner System

Posture evaluation method for aircraft component based on hole feature

A Novel Posture Alignment System for Aircraft Wing Assembly

Variation modeling for fuselage structures in large aircraft digital assembly

Estimation and Alignment Method of Wing Position and Orientation for Aircraft Digital Assembly