Numerical study on the geomechanical responses in the Jilin Oilfield CO 2 -EOR and CGS projects in China

Xiaoqi Ye,Ziwang Yu,Tianfu Xu,Yanjun Zhang,Liangliang Guo
DOI: https://doi.org/10.1016/j.energy.2024.133306
IF: 9
2024-10-03
Energy
Abstract:In order to overcome the limitation of low recovery in secondary recovery of oil fields, CO 2 is used as a reliable solvent to enhance oil recovery. The process also enables the storage of greenhouse gas. The CO 2 -enhanced oil recovery (CO 2 -EOR) and CO 2 geological storage (CGS) projects in the Jilin oilfield in China represent the largest carbon capture sequestration with EOR (CCS-EOR) demonstration project in Asia. A coupled model of Darcy seepage and solid mechanics was developed using extensive monitoring data from CO 2 injection and oil production in the H-59 block. Multiphysics simulations of the CO 2 -EOR and CGS processes were conducted because large-scale CO 2 injection and storage projects were planned in the region. The simulations analyzed trends in CO 2 plume migration, pore pressure variations, formation deformation, and the mechanical stability of the caprock throughout the injection and production phases. The results indicated that the layer with the highest permeability retained the majority of the injected CO 2 (53.8 %). Pressure disturbances were significantly higher and widespread in areas with denser well spacing. Despite CO 2 storage in the reservoir during the CO 2 -EOR project, the maximum surface subsidence in the dense well group was 5.02 mm after six years of CO 2 injection and oil production. In the CGS project, the maximum uplift rate was 2.88 mm/year, and a maximum surface uplift of 12.9 mm was observed after five years of large-scale CO 2 injection. These uplift amounts and rates adhered to international safety standards. The caprock exhibited no shear or tensile failure in CO 2 -EOR project and CGS project. This study offered valuable insights into the geomechanical responses associated with CO 2 -EOR and CGS in depleted oil and gas reservoirs.
energy & fuels,thermodynamics
What problem does this paper attempt to address?