Chemical‐Mechanical Impacts of CO2 Intrusion into Heterogeneous Caprock

Ting Xiao,Hao Xu,Nathan Moodie,Richard Esser,Wei Jia,Liange Zheng,Jonny Rutqvist,Brian McPherson

DOI: https://doi.org/10.1029/2020wr027193

IF: 5.4

2020-09-17

Water Resources Research

Abstract:The potential economic benefits offered by CO 2 ‐enhanced oil recovery (CO 2 ‐EOR) and storage, including increasing oil production and mitigating CO 2 storage cost, makes it an attractive approach for reducing CO 2 emissions. Sealing formation (caprock) integrity is considered a key risk factor, because of the potential for leaked CO 2 or brine migrating into shallow groundwater formations. The primary purpose of this research is to evaluate general caprock sealing efficiency and integrity under typical CO 2 ‐EOR conditions, by assessing the influence of hydrological and mineralogical heterogeneity, possible mineralogical alteration, and potential failure of rock due to hydrological and mineralogical changes. An active CO 2 ‐EOR project at the Farnsworth Unit (FWU) in the northern Texas is selected as a case study. A coupled reactive‐transport‐geomechanics model of the FWU caprock (the Morrow Shale and the Thirteen Fingers Limestone) was developed based on site‐specific geological data. Key results suggest that the Thirteen Fingers Limestone is an effective caprock. After 5,000 years, effectively no supercritical CO 2 penetrates this formation, and the penetration depth of dissolved CO 2 in aqueous phase does not exceed 10 m. Because of mineral precipitation in the Morrow Shale, maximum porosity decreases ~25% at the reservoir‐caprock interface, suggesting increased caprock sealing efficiency. Geomechanical response of the caprock due to CO 2 intrusion and mineral alteration suggests low risk of induced fractures. This study provides a refined evaluation of long‐term caprock integrity as a function of coupled hydrological, chemical and geomechanical processes, and is intended to support future assessment of feasibility and safety of geologic CO 2 sequestration.

environmental sciences,water resources,limnology

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to evaluate the sealing efficiency and integrity of the caprock under typical carbon dioxide - enhanced oil recovery (CO₂ - EOR) conditions, especially considering the influence of hydrological and mineralogical heterogeneity, possible mineralogical changes, and potential rock failure due to hydrological and mineralogical changes. The specific objectives of the study include:

1. Understanding how CO₂ affects the long - term (e.g., 5,000 years) caprock integrity.
2. Quantitatively analyzing the possible geochemical changes in the caprock under CO₂ - rich conditions.
3. Evaluating the impact of hydrological and mineralogical heterogeneity on the sealing capacity of the caprock at CCUS (Carbon Capture, Utilization and Storage) sites.
4. Evaluating the geomechanical responses related to mineralogical changes.

To achieve these objectives, the authors selected the Farnsworth Unit (FWU) in the Anadarko Basin in northern Texas as a case study, where active CO₂ - EOR and sequestration activities are underway. The study used the method of coupling the reactive - transport simulator TOUGHREACT with the geomechanical simulator FLAC3D to analyze the chemo - mechanical coupling process of CO₂ invasion in the caprock. Through these methods, the study aims to provide a detailed long - term assessment of caprock integrity to support future evaluations regarding the feasibility and safety of geological CO₂ sequestration.