Abstract:Bi2Te3-based compounds are thermoelectric materials with the best performance near room temperature. The existence of a large number of complex defects makes defect engineering a core stratagem for adjusting and improving the thermoelectric performance. Therefore, understanding and effectively controlling the existence form and concentration of defects is crucial for achieving high-thermoelectric performance in Bi2Te3-based alloy. Herein, a series of Cl doped n-type quaternary Bi2-xSbxTe3-ySey compounds is synthesized by the zone-melting method. The correlation between defect evolution process and thermoelectric performance is systematically investigated by first-principles calculation and experiments. Alloying Sb on Bi site and Se on Te site induce charged structural defects, leading to a significant change in the carrier concentration. For Bi2-xSbxTe2.994Cl0.006 compounds, alloying Sb on Bi site reduces the formation energy of the antisite defect, which generates the antisite defect and accompanied with the increase of the minority carrier concentration from 2.09x10(16) to 3.99x10(17) cm(-3). The increase of the minority carrier severely deteriorates the electrical transport properties. In contrast, alloying Se in the Bi1.8Sb0.2Te2.994-ySeyCl0.006 compound significantly lowers the formation energy of the complex defect +, which becomes more energetically favorable and suppresses the formation of the antisite defect. As a result, the concentration of minority carriers decreases to 1.46x10(16) cm(-3). This eliminates the deterioration effect of the minority carrier on the electrical transport properties of the material and greatly improves the power factor. A maximum power factor of 4.49 mW/(m center dot K-2) is achieved for Bi1.8Sb0.2Te2.944Se0.05Cl0.006 compound at room temperature. By reducing thermal conductivity through intensifying the phonon scattering via alloying Sb and Se, the maximum ZT value of 0.98 is attained for Bi1.8Sb0.2Te2.844Se0.15Cl0.006 compound at room temperature. Our finding provides an important guidance for adjusting point defects, carrier concentrations, and thermoelectric performances in Bi2Te3-based compounds with complex compositions.

Lattice Regularization by Manipulating Over-Stoichiometric Defects Yields High-Performance (bi,sb)2te3 Thermoelectrics.

Mediating Point Defects Endows N-Type Bi2 Te3 with High Thermoelectric Performance and Superior Mechanical Robustness for Power Generation Application.

Substitutions and Dislocations Enabled Extraordinary N-Type Thermoelectric PbTe

Synergistic modulation of mobility and thermal conductivity in (Bi,Sb)2Te3 towards high thermoelectric performance

Defect Structure Regulation and Thermoelectric Transfer Performance in N-Type Bi2-xSbxTe3-ySey-based Compounds

Critical Role of Tellurium Self-Compensation in Enhancing the Thermoelectric Performance of P-Type Bi0.4Sb1.6Te3 Alloy

Vacancy Manipulation by Ordered Mesoporous Induced Optimal Carrier Concentration and Low Lattice Thermal Conductivity in BixSb2- xTe3 Yielding Superior Thermoelectric Performance

Achieving N- and P-Type Thermoelectric Materials with the Identical Chemical Composition BiSbTe1.5Se1.5 by Defect Structure Engineering

BiSbTe alloy with high thermoelectric and mechanical performance for power generation

Point Defect Engineering of High‐Performance Bismuth‐Telluride‐Based Thermoelectric Materials

Broadening temperature plateau of high zTs in PbTe doped Bi0·3Sb1·7Te3 through defect carrier regulation and multi-scale phonon scattering

Synergistic Texturing and Bi/Sb‐Te Antisite Doping Secure High Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3 ‐Based Thin Films

Enhancing thermoelectric performance of Sb2Te3 through swapped bilayer defects

Synergistic optimization of the thermoelectric performance of BiSbSe3 using doping and multi-scale defect engineering

Organic/Inorganic Hybrid Design as a Route for Promoting the Bi<sub>0.5</sub>Sb<sub>1.5</sub>Te<sub>3</sub> for High-Performance Thermoelectric Power Generation

Attaining high mid-temperature performance in (Bi,Sb) 2 Te 3 thermoelectric materials via synergistic optimization

Optimized Thermoelectric Properties of Bi0.48Sb1.52Te3 Through AgCuTe Doping for Low-Grade Heat Harvesting.

High Performance Thermoelectric Power of Bi 0.5 Sb 1.5 Te 3 Through Synergistic Cu 2 GeSe 3 and Se Incorporations

High‐Performance Industrial‐Grade p‐Type (Bi,Sb)2Te3 Thermoelectric Enabled by a Stepwise Optimization Strategy

High performance of Mg3Bi1.5Sb0.5 based materials for power generation: Revealing the counter-intuitive effect of tuning Bi content on the thermoelectric properties

Enhanced Thermoelectric Performance of P‐Type (Bi,Sb)2Te3 by Incorporating Non‐Stoichiometric Ag5Te3 and Refining Te‐Se Ratio