Abstract:Rolling element bearing is a vital component in rotating machinery, such as a wind turbine (WT) system. By accurately monitoring its health condition, the faults can be detected at an early stage, providing sufficient lead time to perform maintenance and hence reducing accidents and economic losses. Bearing usually suffers from various wears and tears, which result in a gradual increase in clearance through its lifetime. Insufficient understanding of vibration characteristics under different clearances brings difficulties for bearing condition monitoring. Thus, this paper presents a nonlinear bearing vibration model with six degrees of freedom (DOF) to investigate the vibration characteristics under different radial clearances and load conditions. Then, a dedicated bearing test is established to verify the reasonability and effectiveness of the vibration model. Furthermore, a comprehensive simulation analysis is conducted to study the vibration characteristics over an extended range of the internal radial clearance and external load. Results show that the dynamic force on each ball presents an impulse whose magnitudes increases whereas the pulse width reduces with clearance increases. Ball pass frequency of outer race (BPFO) is the dominant modulation component and the frequency is in accordance with the number of dynamic force impulses. Two indicators, i.e., root mean square (RMS) value and spectral centroid, are proposed to indicate clearance changes. In general, they show an uptrend with the increase in clearance, which is in line with the dynamic force increasing with clearance, especially the spectral centroid of the low frequency band. However, it should be noted that the RMS value and spectral centroid exhibit a fluctuating behavior due to nonlinear vibration responses. For the first time, this study shows the details of vibration characteristics with clearance variations and provides a foundation for monitoring the bearing conditions before any obvious local defects on raceways.

An In-situ Vibration Monitoring for a Special-Structure Bearing

Lubrication Performance Analysis of Lead-Bismuth Internal-Feedback Bearings in the Nuclear Main Pump System

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Theoretical and experimental study on the fluid-structure-acoustic coupling dynamics of a new water lubricated bearing

Vibration Characteristics of Rolling Element Bearings with Different Radial Clearances for Condition Monitoring of Wind Turbine

Experimental Study of Full-Size Tilting-Pad Bearings and Research of the Lubrication and Vibration Performance

Investigation on the Lubrication Regimes and Dynamic Characteristics of Hydro-Hybrid Bearing of Two-Circuit Main Loop Liquid Sodium Pump System

Lubrication and stability analysis of nonlinear rotor-bearing system

A Numerical Investigation of Mixed Thermal Elastohydrodynamic Lubrication in Tilting-Pad Journal Bearing

Lubrication Characteristics of Hybrid Bearing in Sodium-cooled Fast Reactor

Study on the Static Performance and Stability of a Water-Lubricated Hybrid Bearing with Circumferential Grooves and Stepped Recesses Considering the Influence of Recess Sizes

Effect of Radial Clearance on the Dynamic Behavior of Adjustable Journal Bearings in Turbulent and Laminar Flow Regimes

Research on the Influence of Clearance Variation on the Stiffness Fluctuation of Ball Bearing under Different Operating Conditions

Analysis on the Lubrication Performances of Journal Bearing System Using Computational Fluid Dynamics and Fluid–structure Interaction Considering Thermal Influence and Cavitation

Investigation of the Combined Influence of Turbulence and Thermal Effects on the Performance of Water-Lubricated Hybrid Bearings with Circumferential Grooves and Stepped Recesses

Experimental Study on the Dynamic Performance of Water-Lubricated Rubber Bearings with Local Contact

Influence of axial clearance on load distribution in double supported tapered roller bearings of wind turbine main shaft

Numerical Investigation of Subsynchronous Vibration in Floating Ring Bearings

Study on the friction characteristic of a water-lubricated hybrid bearing

Numerical Investigation on Dynamic Characteristics of Hydrodynamic Bearing

Investigation on the nonlinear dynamic behaviors of water-lubricated bearings considering mixed thermoelastohydrodynamic performances