Abstract:Fluoride salt-cooled, High-temperature Reactors (FHRs), featuring particle fuel, graphite moderator, and molten fluoride salt coolant, are used for electricity generation and process heat applications. The primary loop of an FHR is a closed loop that operates slightly above the atmospheric pressure with the fluoride salt temperature over 600°C. Reliable high-temperature molten salt pumps are critical to the successful deployment of FHRs. To stabilize rotating shafts and reduce the associated friction coefficients, well-designed bearings are required for molten salt pumps. Therefore, it is necessary to investigate the detailed hydrodynamic performance of bearings under high-temperature molten salt conditions. In this study, a computational fluid dynamics software package, i.e., STAR-CCM+, was used to predict the performance of fluoride salt–lubricated bearings. The numerical models were verified and validated respectively based on an analytical solution derived from the Reynolds equation and experimental data published in the literature. Good agreement was observed between the simulation results and the analytical solution and experimental data with a maximum relative discrepancy of less than 5%. The validated numerical model was then employed to predict the pressure distributions, applied static loads, and power losses of high-temperature fluoride salt–lubricated bearings with various Sommerfeld numbers. In addition, a parametric analysis was performed to investigate the influence of the axial and helical grooves of bearings on applied static load and power loss. It is found that under the same salt lubrication conditions, the bearings with helical grooves and axial grooves respectively yield 20% off and 14% off power loss compared with the bearing without grooves.

Lubrication Characteristics of Hybrid Bearing in Sodium-cooled Fast Reactor

Lubrication Performance Analysis of Lead-Bismuth Internal-Feedback Bearings in the Nuclear Main Pump System

Investigation on the Lubrication Regimes and Dynamic Characteristics of Hydro-Hybrid Bearing of Two-Circuit Main Loop Liquid Sodium Pump System

Design on Hybrid Ceramic Bearing Based on Water Based Fluid with Controllable Viscosity

Multi-objective Optimization Design of Sliding Bearing of High-speed Centrifugal Pump Based on Lubrication Characteristics Analysis

Flow field analysis and structure optimization of liquid sodium hybrid bearing

Numerical study on static performance of hydrodynamic bearing in high-speed liquid hydrogen centrifugal pump

Theoretical and Experimental Results of Water-Lubricated, High-Speed, Short-Capillary-Compensated Hybrid Journal Bearings

Analysis of lubrication performance and flow field for lead-bismuth bearings considering the temperature-viscosity effect

Numerical Investigations of Molten Salt Pump Journal Bearings Under Hydrodynamic Lubrication Conditions for FHRs

Composite thermal oil film lubrication model for hybrid journal bearings

Hybrid Journal Bearings For Cryogenic Liquid Rocket Engine Turbopumps

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

A Numerical Investigation of Mixed Thermal Elastohydrodynamic Lubrication in Tilting-Pad Journal Bearing

Analytical and Experimental Research on Tribological Properties of Water-lubricated Thrust Bearings

Analysis of Fluid-Thermal Coupling in Ferrofluid Bearing Used in High Speed Machines

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Analysis of a Hybrid Bearing with Several Low-viscosity Fluids

Molten Salt Pump Journal-Bearings Dynamic Characteristics Under Hydrodynamic Lubrication Conditions

An In-situ Vibration Monitoring for a Special-Structure Bearing

Performance analysis of hybrid journal bearings in two phase flow based on liquid-vapor mixture model