Abstract:Brick-concrete buildings have been extensively used in urban and rural areas.However,this type of building,which frequently contains a shallow foundation,demonstrates poor struc-tural integrity and is susceptible to influence from ambient vibrations.This case is especially validfor buildings that were constructed in previous eras.With the development of modern cities andthe increasing demand for an enhanced quality of life,environmental interference caused by ambi-ent vibrations has become a critical issue.In areas with soft soil,traffic is a primary source ofambient vibrations.Vehicle vibrations caused by road surface roughness or speed changes cancause vibrations throughout the foundation of a building.Therefore,the vibration of brick-con-crete buildings is related not only to the excitation source of the vibration but also the soil charac-teristics,the foundation conditions,and the structural style.The human response to the vibra-tions of housing structures is closely correlated with a person's cognitive level and their currentphysical and psychological conditions.Thus,the potential difference in the reactions amongbuilding occupants is significant.Residents in a six-story brick-concrete building,which is located in an area of Shanghai withsoft ground,frequently complained about the intermittent interference from vibrations,particularly residents on the upper two stories.The measures confirmed that the environmental vibra-tions were generated by heavy vehicles traveling on a road that was located approximately 80 mnorth of the building.The frequency and amplitude characteristics of the ambient vibrations andthe human comfort levels for the different stories of the building were analyzed according to the"standard for allowable vibration of building engineering"(GB50868-2013).To comprehensivelyevaluate the impact induced by the transversely horizontal vibrations,which influences humancomfort levels for the three components of building vibration,a numerical finite element model(FEM)of the building was developed and analyzed.The soil in the model was simulated as a vir-tual layer.According to the test results and the numerical analyses,two types of technical measures areproposed to reduce unfavorable vibrations.The paper yields the following conclusions:(1)The test results show that heavy-duty vehicles from nearby roads are the main cause ofthe building vibrations.The vertical component of the vibrations along the structure is almostconstant;however,its lateral component is significantly amplified,which primarily influenceshuman comfort.(2)The measures indicate that the peak acceleration range for the top two stories is 68~70dB,which is lower than the limit values proposed by the"standard for allowable vibration ofbuilding engineering"(GB50868-2013).The rationality of the limit values is discussed to satisfythe demand of human comfort.(3)The structural frequencies and modes are analyzed based on the assumption of a virtuallayer of foundation;the simulated results correspond with the measures.The model is a reasona-ble tool for justifying the effect of vibration reduction measures.(4)To ensure that each story of the multi-story brick-concrete building complies with thepreviously recommended standard,the peak lateral acceleration should be reduced by approxi-mately 21% and the two proposed technical measures,which are compared,should be applied.

Study on the Vibration Comfort of a High-Rise Industrial Building

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

Vibration and Wave Propagation in High-Rise Industrial Buildings

Vibration Reduction for Brick-concrete Buildings in an Old Residential Area

Practical Analysis of Wind-Induced Human Comfort Condition of Tall Buildings

Ambient Vibration Test for a Multi-story Residential Building and the Vibration Mitigation Measures

Vibration Tests and Crack Analyses on Multi-Storeys Industrial Factory Buildings

Evaluation of Industrial Vibration Impact to Tall Residential Buildings in Shanghai

Analysis of vibration properties about two different types of buildings

Control of Human-Induced Vibration of an Innovative CSBS–CSCFS

VIBRATION COMFORT ANALYSIS AND DESIGN OF CONCRETE FLOOR BASED ON ANNOYANCE RATE

The Transmission Characteristics and Influence Prediction of Impulsive Vibration Caused by a Solid Metal Ball Impact in Buildings

Field Measurement-Based Pedestrian-Induced Vibration Analysis and Comfort Evaluation of a Steel Truss Footbridge

Analysis and optimization of seismic performance of high-rise residential building

Vibration test of a high-rise building and seismic performance analysis

Experiment study on the wind vibration resisting system of high-rise buildings

Real-time hybrid model test to replicate high-rise building resonant vibration under wind loads

Vibration transmissions and predictions within low-rise buildings above throat area in the metro depot

Structural Response Analysis and Comfort Evaluation of Residential Buildings: A Combined Wind Tunnel and FEM Approach

Dynamic Performance Characteristics of an Innovative Cable Supported Beam Structure–Concrete Slab Composite Floor System under Human-Induced Loads

Vibration Behavior of Composite Cold-Formed Steel Floors with Concrete Topping due to Heel-Drop Loading