Abstract:AbstractDifficult-to-machine materials such as Ni-based superalloy suffer from severe tool wear and poor surface quality; therefore, the cooling mechanism is the key to improving machining performance and reducing the environmental pollution in manufacturing. In the past, plenty of studies verified that the micro-texture on the cutting insert improved the cutting performance under the same cooling condition. The main explanation is that the second generated cracks caused the capillary siphon phenomenon and increased the wettability of the subsurface of the workpiece. In order to investigate the effect of surface wettability differences on the cutting performance of the tool under different micro-textured morphologies, three types of micro-textured CBN tools with pit, linear, and sinusoidal morphologies were fabricated by laser machining technology. Through cutting experiments on Inconel 718 Ni-based superalloy, the cutting force, tool wear, and machined surface roughness of different micro-textured tools were compared and analyzed. The relationship between cutting performance and wettability of different shaped micro-texture was obtained by measuring the contact angle using PT-705B optical angular contact meter. The experimental results show that the presence of surface micro-textures enhances the surface wettability of the tool. It effectively reduces the cutting force and slows down the rake face’s wear and the machined part’s surface roughness. Compared with other morphologies, sinusoidal micro-textured tools show the best cutting performance. Among the four morphologies of micro-textured tools, cutting performance improvement increases with surface wettability. More generally, these primary findings are consistent with research showing that wettability is critical in micro-texture generation for high-performance machining. The conclusion is very much the key component in future attempts to overcome the assumption of the capillary siphon phenomenon on the subsurface of the workpiece.

In-situ Forming Textured Cutting Tools Based on Electrohydrodynamic Atomization and Laser Micro-Cladding Technology

Laser Micro-Cladding in Situ Forming Textured Surface to Improve the Tribological Performance

Inhibitory Effect of Laser Surface Texturing in Dry Cutting of Titanium Alloy on Cemented Carbide Tool Wear

Assessment of self-lubricating coated cutting tools fabricated by laser additive manufacturing technology for friction-reduction

Tailored Laser Structuring of Tungsten Carbide Cutting Tools for Improving Their Tribological Performance in Turning Aluminum Alloy Al6061 T6

Recent Progress on Fabrication Technologies and Machining Performance of Textured Cutting Tools

Enhancement of carbide tool performance during dry machining through a combination of laser surface texturing and tungsten disulfide soft coatings

Analysis of Tool-Chip Interface Characteristics of Self-Lubricating Tools with Nanotextures and WS2/Zr Coatings in Dry Cutting

Ultrasonic Elliptical Vibration Texturing of the Rake Face of Carbide Cutting Tools for Adhesion Reduction

Microstructure and Mechanical Properties of Ti-6al-4v Components Fabricated by Laser Micro Cladding Deposition

Effect of micro-textured morphology with different wettabilities on tool cutting performance

High Temperature Wear Performance of In-Situ Forming Textured Ni60/WC/h-BN Composite Coatings Based on Laser Micro-Cladding

The Effect of Micro-Texture on Wear Resistance of WC/Co-based Tools During Cutting Ti-6Al-4V

Enhancing orthogonal finishing machining of Ti6Al4V with laser-ablated tool geometry modifications

Preparation and Cutting Performance of Nanoscaled Al2O3-coated Micro-Textured Cutting Tool Prepared by Atomic Layer Deposition

Short communication: Experiment study on micro-textured tool with internal cooling

Preparation Technology and Properties of Microtexture Diamond-Coated Tools

Lubricant transportation mechanism and wear resistance of different arrangement textured turning tools

Tribological performance of hydrophobic and micro/nano triangle textured rake face of cutting tools

Improving the Performance of Micro-Textured Cutting Tools in Dry Milling of Ti-6Al-4V Alloys

Performance Research on Bionic Tools Based on Surface Microstructures of Blood Clams in Dry Cutting of GH4169