Abstract:AbstractDifficult-to-machine materials such as Ni-based superalloy suffer from severe tool wear and poor surface quality; therefore, the cooling mechanism is the key to improving machining performance and reducing the environmental pollution in manufacturing. In the past, plenty of studies verified that the micro-texture on the cutting insert improved the cutting performance under the same cooling condition. The main explanation is that the second generated cracks caused the capillary siphon phenomenon and increased the wettability of the subsurface of the workpiece. In order to investigate the effect of surface wettability differences on the cutting performance of the tool under different micro-textured morphologies, three types of micro-textured CBN tools with pit, linear, and sinusoidal morphologies were fabricated by laser machining technology. Through cutting experiments on Inconel 718 Ni-based superalloy, the cutting force, tool wear, and machined surface roughness of different micro-textured tools were compared and analyzed. The relationship between cutting performance and wettability of different shaped micro-texture was obtained by measuring the contact angle using PT-705B optical angular contact meter. The experimental results show that the presence of surface micro-textures enhances the surface wettability of the tool. It effectively reduces the cutting force and slows down the rake face’s wear and the machined part’s surface roughness. Compared with other morphologies, sinusoidal micro-textured tools show the best cutting performance. Among the four morphologies of micro-textured tools, cutting performance improvement increases with surface wettability. More generally, these primary findings are consistent with research showing that wettability is critical in micro-texture generation for high-performance machining. The conclusion is very much the key component in future attempts to overcome the assumption of the capillary siphon phenomenon on the subsurface of the workpiece.

Tribological performance of hydrophobic and micro/nano triangle textured rake face of cutting tools

Friction and cutting characteristics of micro-textured diamond tools fabricated with femtosecond laser

Ultrasonic Elliptical Vibration Texturing of the Rake Face of Carbide Cutting Tools for Adhesion Reduction

The Effect of Micro-Texture on Wear Resistance of WC/Co-based Tools During Cutting Ti-6Al-4V

Evaluation of tribological performance for laser textured surfaces with diverse wettabilities under water/oil lubrication environments

An Experimental Investigation of Tribological Performance of Triangular Textures in Water Lubrication Regime

Optimization of Micro-Texturing Process Parameters of TiAlN Coated Cutting Tools by Femtosecond Laser

Enhancing Wear Resistance and Cutting Performance of a Long-Life Micro-Groove Tool in Turning AISI 201

Preparation of Superhydrophobic 35CrMo Surface and Its Tribological Properties in Water Lubrication

Effect of micro-textured morphology with different wettabilities on tool cutting performance

Mechanisms and predictive force models for machining with rake face textured cutting tools under orthogonal cutting conditions

Study on the effect of texture on cutting performance of the coated tool with finite element analysis and experimental method

Surface Textures Fabricated by Laser Surface Texturing and Diamond Cutting - Influence of Texture Depth on Friction and Wear

An Experimental Study into the Effect of Micro-Textures on the Performance of Cutting Tool

Study on the Friction-Reducing Mechanisms of Surface Texture Cemented Carbide under Dry Sliding

Influence of Textured Diamond Film on Tribological Properties of Cemented Carbide Substrate

A novel hybrid micro-texture for improving the wear resistance of PCD tools on cutting SiCp/Al composites

Enhancing the Machining Performance by Cutting Tool Surface Modifications: a Focused Review

Friction and wear properties of textured surface for bearing steel with mango-shaped micro geometries

Reducing the Adhesion Effect of Aluminum Alloy by Cutting Tools with Microgroove Texture

Preparation Technology and Properties of Microtexture Diamond-Coated Tools