Abstract:The layer-by-layer processing features of laser melting deposited (LMD) TC11 titanium alloy inevitably lead to microstructural inhomogeneity, and the grain morphology associated with micro-orientations induces plastic anisotropy, which causes uneven deformation and further performance deterioration. Understanding the main causes of these characteristics and how to distinguish their relative roles in inducing plastic anisotropy is critical. In this work, a high-efficiency LMD process is developed. Then, the individual factors causing the formation of elongated grains, microstructural inhomogeneity and micro-orientations are isolated to investigate the synergistic and competitive mechanisms of plastic anisotropy for high-efficiency LMD TC11 titanium alloy before and after various heat treatments. Initially, the TC11 titanium alloy is prepared by the LMD technique under high laser power and then heat-treated via three methods of double annealing in the α+β phase zone. Subsequently, the macro- and microscopic morphology, microstructure, and micro-orientations are characterized by optical microscopy (OM), scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD). The individual effects of grain shape, α grain boundary (αGB) and micro-orientations on tensile plastic anisotropy are systematically and thoroughly investigated via a hybrid method consisting of experimental and crystal plasticity finite element simulation methods. By introducing a redefined evaluation indicator of dislocation plugging coefficients, elongated grains are found to be the main source affecting the tensile strength in different loading directions. In addition, with increasing primary annealing temperature, the breakage degree of αGB parallel to the building direction (BD) is significantly higher than that perpendicular to the BD, which leads to an increase in tensile strength and elongation. Moreover, the preferred <0 0 0 1> orientation leads to different tensile strengths perpendicular and parallel to the BD, which is caused by the transformation between easy-to-slip and hard-to-slip orientations. The micro-orientations mainly affect the yield strength and elongation, while the tensile strength and elongation are simultaneously controlled by the grain morphology and αGB.

Abnormal Aging Behaviors Induced by High-Density Dislocations for an Ultra-High-strength Titanium Alloy Prepared by Laser-Directed Energy Deposition

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Microstructure and Mechanical Properties of An Ultrahigh-strength Titanium alloy Ti-4.5Al-5Mo-5V-6Cr-1Nb Prepared Using Laser Directed Energy Deposition and Forging: A Comparative Study

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

Achieving ultra-high strength rapidly in Ti-3Al-8V-6Cr-4Mo-4Zr alloy processed by directed energy deposition

Synergistic and Competitive Mechanisms of Plastic Anisotropy in High-Efficiency Laser Melting Deposited TC11 Alloy

Microstructures and Mechanical Behaviors of a Directional Lamellar Ti-48Al-2Cr-2Nb Alloy Produced by Laser Additive Manufacturing

Anisotropic Tensile Behavior of Ti-47Al-2Cr-2Nb Alloy Fabricated by Direct Laser Deposition

Atomic clusters induced rapid hardening behavior in an early stage of isothermal aging for a high-strength Al alloy produced by laser powder bed fusion additive manufacturing

Superior High-Cycle Fatigue Property Through In-Situ Precipitation of Α' Martensite in Additively Repaired Titanium Alloy

Balance of strength and ductility for laser directed energy deposited Ta-containing Ti6Al4V via solution and aging treatment

Microstructure and mechanical properties of a newly developed Ti-6Al-2Mo-2Sn-2Zr-2Cr-2V alloy fabricated by laser directed energy deposition

Micro-deformation behavior of laser melting deposited multi-gradient TC4/TC11 alloy under tension-tension cyclic loading

The ageing response of direct laser deposited metastable β-Ti alloy, Ti–5Al–5Mo–5V–3Cr

Obtaining heterogeneous α laths in selective laser melted Ti–5Al–5Mo–5V–1Cr–1Fe alloy with high strength and ductility

Making Titanium Alloys Ultrahigh Strength and Toughness Synergy Through Deformation Kinks-Mediated Hierarchical Α-Precipitation

Effect of high temperature aging on microstructures and tensile properties of a selective laser melted GTD222 superalloy

Effect of discrete deposition and segregated heat-treatment on the macro- and microstructure, and tensile properties of large-scale titanium alloy components by laser melting deposition

Unconventional precipitation and martensitic transformation behaviour of Ni-rich NiTi alloy fabricated via laser-directed energy deposition

A large compressive recoverable strain induced by heterogeneous microstructure in a Ni50.6Ti49.4 shape memory alloy via laser powder bed fusion and subsequent aging treatment