Abstract:In zero-emission solutions for the hydrogen supply chain, high-pressure hydrogen storage in Type IV composite overwrapped pressure vessels (COPVs) is crucial for being safe and secure for a variety of stationary and transport applications. These COPVs consist of a polymeric liner material that works as a barrier for the stored hydrogen, while the carbon fiber-based composite provides the strength to hold the high-pressure hydrogen (of nominal working pressure more than 70 MPa to achieve the competitive driving range). Several experimental studies and simulation work have been performed on the viability of various polymers as low-permeability materials under low-pressure conditions. However, because of their proprietary nature and commercialized research, the characteristics of hydrogen permeation through polymers and their behavior at high pressure are still readily available in the literature. It is a major concern and the most crucial component of Type IV COPVs that these polymeric liners hold high pressure and maintain the necessary density of hydrogen (state of charge) toward operational requirements and safety concerns related to the cause of failures due to permeation (such as blistering, buckling, cracking, and so on). This paper investigates the role of polymeric liners on hydrogen permeation behavior using finite element modeling. For this, a UMATHT subroutine is developed within the Abaqus software to implement a new hydrogen permeation transport model with extended governing equations. Through the simulations and material modeling, the role of hydrogen transport properties (permeability, diffusivity, and solubility), structural characteristics (crystallinity, free volume, thickness) of plastic liners, and the role of operational parameters (concentration, pressure) are combined to validate the model from the experimental data in the literature to estimate the effective thickness required to maintain the permeation limit of the polymeric liner of 70 MPa Type IV COPVs.

Hydrogen Permeation Behavior of the Liner of Type IV Hydrogen Storage Cylinders under Different Pressures

Review of the Hydrogen Permeation Test of the Polymer Liner Material of Type IV On-Board Hydrogen Storage Cylinders

Mechanical Analysis of Carbon Fiber Filament Wound Hydrogen Storage Vessel with Aluminum Alloy Liner

DEVELOPMENT OF STRIP WINDING HIGH PRESSURE HYDROGEN STORAGE VESSEL WITH LOW STRESS INNER LINER

Study on Burst Pressure of Type Ⅳ Hydrogen Storage Cylinder Based on Progressive Failure Analysis

Blister Damage Evolution in Plastic Liner of Type IV Hydrogen Storage Vessel Studied by Fracture Mechanics

Hydrogen Permeability of Polyamide 6 Used as Liner Material for Type IV On-Board Hydrogen Storage Cylinders

Experimental Analysis on Residual Performance of Used 70 MPa Type IV Composite Pressure Vessels

Investigation of hydrogen transport properties through the liner material of 70 MPa type IV composite overwrapped pressure vessels

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Damage Assessment of Liquid Nitrogen Filling on Type III Cylinder in Cryo-Compressed Hydrogen Storage Cylinder

DESIGN AND OPTIMIZATION OF HIGH-PRESSURE HYDROGEN CYLINDERS FOR INTERMODAL CONTAINER TRANSPORTATION

Research On Hydrogen Permeability Of Polyamide 6 As The Liner Material For Type Iv Hydrogen Storage Tank

Study on the manufacturing and failure modes of type iv high-pressure hydrogen vessel liner

Challenges in Developing Linerless Composite Gas Cylinder for On-Board Hydrogen Storage

Research on the Influence of the Liner Crack Size and Location on Fatigue Life of 70mpa Type III Cylinder

Molecular Dynamics Simulation of Hydrogen Barrier Performance of Modified Polyamide 6 Lining of IV Hydrogen Storage Tank with Graphene

Study of blister phenomena on polymer liner of type IV hydrogen storage cylinders

Review of Decompression Damage of the Polymer Liner of the Type IV Hydrogen Storage Tank

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Study of the Failure Mechanism of a High-Density Polyethylene Liner in a Type IV High-Pressure Storage Tank