Abstract:With the development of hydrogen fuel cell vehicles, the on-board hydrogen storage technology with safety, efficiency and economy has become a fundamental part. Low cost, light weight and good safety performance are required for the on-board hydrogen storage tanks. The composite high-pressure hydrogen storage tank has been recognized as an efficient solution that could address these problems. However, the complex working environment of hydrogen-thermo-mechanism presents challenge to the failure analysis and predictive model establishment of the composite hydrogen storage tanks. The crucial parameters or indicators for tank's failure analysis include burst pressure, damage state and fatigue lifetime, etc. So this paper gives a comprehensive review on the failure behavior analysis methods and prediction models of composite high-pressure hydrogen storage tanks from the literature. First, the failure analysis methods of composite high-pressure hydrogen storage tanks are summarized. Second, the latest literature regarding failure mode predictive methods and models of type III and type IV tanks are reviewed. The different failure criteria are compared and summarized, including some new failure criteria. These criteria enable failure analysis methods to obtain the interaction information on the interaction between the microscopic and macroscopic aspects of the composite. Damage evolution model and constitutive model are summarized. The post-initial failure behavior of the composite laminates structure is simulated by the material property degradation method (MPDM), especially the continuum damage mechanics (CDM) in conjunction with commercial finite element (FE) analysis method. The process of progressive failure analysis of composite tank is summarized as a reference for subsequent failure analysis. The future work of progressive failure analysis should focus on the initial failure of the composite material and microscopic failure mechanisms. The burst, fiber damage and fatigue life are the mainly investigated failure modes for type III composite hydrogen storage tank. For Type IV, the mainly researched failure modes are the collapse and blistering of the liner, burst and damage. The different finite element analysis methods and failure predictive models were classified and summarized. Further improvements were required for the simulation models of full-scale structure of the tank in the working environment or under the complex fiber winding modes. The liner of the type IV cylinder is completely distinct from that of the type III, therefore the behavior of collapse and blistering of the liner needs to be further investigated. The factors that affect collapse and blistering should be explored. The future research need focus on controlling these factors and monitoring the effects of these factors towards structural strength.

Study on the manufacturing and failure modes of type iv high-pressure hydrogen vessel liner

Blister Damage Evolution in Plastic Liner of Type IV Hydrogen Storage Vessel Studied by Fracture Mechanics

Mechanical Analysis of Carbon Fiber Filament Wound Hydrogen Storage Vessel with Aluminum Alloy Liner

Experimental Analysis on Residual Performance of Used 70 MPa Type IV Composite Pressure Vessels

DEVELOPMENT OF STRIP WINDING HIGH PRESSURE HYDROGEN STORAGE VESSEL WITH LOW STRESS INNER LINER

Study on Burst Pressure of Type Ⅳ Hydrogen Storage Cylinder Based on Progressive Failure Analysis

Mechanical Analysis of Carbon Fiber Wound High Pressure Hydrogen Storage Vessel and Prestress Control in Manufacturing Process

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Stresses Controllable Analysis and Optimal Design of Unique High Pressure Vessel Applied in Hydrogen Charge Station

Analysis of the Boss Structure of Type Ⅳ Composite Vessel for a High-Pressure Hydrogen Tube Trailer

A review on the factors of liner collapse in type IV hydrogen storage vessels

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Hydrogen Permeation Behavior of the Liner of Type IV Hydrogen Storage Cylinders under Different Pressures

Study of blister phenomena on polymer liner of type IV hydrogen storage cylinders

Numerical Simulation on Hydrogen Induced Cracking Behavior of 4130X Hydrogen Storage Vessel with Defect

Review on Hydrogen-Induced Failure of Rubber O-Rings for High Pressure Hydrogen Storage Tanks

Review of Decompression Damage of the Polymer Liner of the Type IV Hydrogen Storage Tank

Damage Assessment of Liquid Nitrogen Filling on Type III Cylinder in Cryo-Compressed Hydrogen Storage Cylinder

Research on the Influence of the Liner Crack Size and Location on Fatigue Life of 70mpa Type III Cylinder

Investigation of hydrogen transport properties through the liner material of 70 MPa type IV composite overwrapped pressure vessels

A Literature Review of Failure Prediction and Analysis Methods for Composite High-Pressure Hydrogen Storage Tanks