Abstract:Due to the fluctuation and non-uniform distribution of temperature within the core structure of high-temperature gas-cooled reactors (HTGRs), the thermal expansion behavior of graphite materials plays an important role in the design of graphite components, especially of large-scale components. In the present paper, in order to investigate the influence of stress levels on the coefficient of thermal expansion (CTE) of IG-110 graphite, the strain gauge method was used to measure the CTE on the cylindrical specimens under a series of loads applied using a universal tensile testing machine. In addition, a more precise measurement using a thermal dilatometer was employed to validate the tests using the strain gauge method. A good agreement has been obtained between the experimental results using these two methods. The results show that when the specimens were under compressive loads, the CTE along the loading direction of the specimens increased and that along the perpendicular direction decreased, with more changes in the former. The absolute changes of the CTE in the two directions increased with increasing applied load. When graphite specimens were subjected to a compressive load of 40MPa, the axial CTE of specimens sectioned along the radial direction of the graphite brick as it is installed in the core structure increased from 4.13×10−6 to 5.35×10−6K−1, while the axial CTE of specimens sectioned along the vertical direction increased from 3.97×10−6 to 5.58×10−6K−1. Moreover, the residual change of the CTE, which was caused by the permanent residual strain after unloading, was observed. The change of the CTE with stress levels should be considered in the stress analysis and life prediction of the nuclear graphite components.

Study of Fatigue Properties of Graphite Materials under Four-Point Bending

Study on Flexural Fatigue Life of Ultra-High Toughness Cementitious Composites under Constant Amplitude Cyclic Loading

Effect of cyclic straining at elevated-temperature on static mechanical properties, microstructures and fracture behavior of nickel-based superalloy GH4145/SQ

Fatigue Testing in Welded Joint of 980- grade Steels

Inverse Identification of Tensile and Compressive Damage Properties of Graphite Material Based on a Single Four-Point Bending Test

Dynamic Fracture Toughness Measurement of Graphite Material Considering Inertial Effect

Experimental and Simulation Study on Stress Concentration of Graphite Components in Tension

The Effect of Stress Levels on the Coefficient of Thermal Expansion of a Fine-Grained Isotropic Nuclear Graphite

Investigating the Effects of Confining Pressure on Graphite Material Failure Modes and Strength Criteria

An Experimental Study On Fracture Toughness Of A Fine-Grained Isotropic Graphite

Experimental Study on Dynamic Tensile Strength of Graphite

Experimental Investigations On Tensile Strength Of Chinese Nuclear Graphite

An Evaluation on Fatigue Crack Growth in a Fine-Grained Isotropic Graphite

Experimental Measurement of Stiffness Coefficient of High-Temperature Graphite Pebble Fuel Elements in Helium at High Temperatures

Static and Dynamic Fracture Toughness of Graphite Materials with Varying Grain Sizes

The Stress and Reliability Analysis of Htr'S Graphite Component

Current Status and Future Prospect of Researches on the Frictional Properties of Graphite for High Temperature Gas-Cooled Reactor

Effect Of In-Core Temperature On The Life Evaluation Of Graphite Component

A Novel Ultrasonic Fatigue Test and Application in Bending Fatigue of TC4 Titanium Alloy

Experimental Study of Friction Coefficient of Graphite for High-Temperature Gas-Cooled Reactors

The Wear Properties of Nuclear Grade Graphite IG-11 under Different Loads