Abstract:Abstract Due to its excellent nuclear physical properties and high-temperature resistance, graphite is widely used in many areas of the nuclear industry. In high-temperature gas-cooled reactors (HTGRs), graphite is used not only in the core structural components as the neutron moderator and reflector, but also as the matrix material for the fuel elements. During the operation of HTGRs, the core structure and fuel element are subject to various static and dynamic loading. Therefore, it is particularly important to study the reliability evaluation of nuclear graphite for the safe operation of reactors. As a typical brittle material, the quantity, size and shape of internal defects of nuclear graphite have strong randomness, which leads to a large discrete strength of nuclear graphite. It is more reasonable to use a probabilistic method to evaluate the strength of nuclear graphite. At present, the dominant approach to the probabilistic evaluation of nuclear graphite is based on finite element methods, such as the Burchell model. However, compared with the meshless method, the finite element method make it difficult to handle the stress singularity brought by the displacement discontinuity, the computation complexity brought by the crack bifurcation and the non-locality of failure. As an emerging meshless method, Peridynamics has been adopted by most scholars. In this paper, we develop a uniaxial tensile fracture model of nuclear graphite based on the ordinary state-based Peridynamic theory. After that, a random number and size of initial defects are added to the nuclear graphite according to the pore-size distribution in the graphite microstructurally parameters. In order to verify the reliability of the model, this paper compares the prediction results of the model with the experimental data on two typical graphites using the two-parameter Weibull function. Besides, this paper compares the model in this paper with the Burchell model, and the results show that the spherical defect shape used in this paper is more suitable for predicting isostatic graphite.

Experimental Investigations On Tensile Strength Of Chinese Nuclear Graphite

Measurement of Tensile Strength of Nuclear Graphite Based on Ring Compression Test

Domestic Graphite Strength Test for HTR Engineering Verification

Determination of Tensile Strength by Modified Brazilian Disc Method for Nuclear Graphite

Experimental and Simulation Study on Stress Concentration of Graphite Components in Tension

Experimental Study on Dynamic Tensile Strength of Graphite

Study on Strength Distribution and Failure Probability for IG 110

The Effect of Stress Levels on the Coefficient of Thermal Expansion of a Fine-Grained Isotropic Nuclear Graphite

Effects of Tensile and Compressive Stresses on Damage Evolution Law of Nuclear Graphite

Modified Probabilistic Assessment Method of Fine grained Graphite

An Experimental Study On Fracture Toughness Of A Fine-Grained Isotropic Graphite

Study on Application of Probabilistic Method in ASME Standard on Fine-grained Graphite

Investigating the Effects of Confining Pressure on Graphite Material Failure Modes and Strength Criteria

An investigation of fracture behaviors of NBG-18 nuclear graphite using in situ mechanical testing coupled with micro-CT

Study of Fatigue Properties of Graphite Materials under Four-Point Bending

Size Effect Of Nuclear Graphite Flexural Strength

The Wear Properties of Nuclear Grade Graphite IG-11 under Different Loads

Dynamic Fracture Toughness Measurement of Graphite Material Considering Inertial Effect

A Nonlocal Meso-Scale Damage Model for Nuclear Graphite

Static and Dynamic Fracture Toughness of Graphite Materials with Varying Grain Sizes

Numerical Simulation of Fracture Toughness on Nuclear Graphi te IG-11