Abstract:Ammonia (NH3) has garnered considerable attention in recent years as a promising carbon-free hydrogen carrier fuel for internal combustion engines. However, directly using pure ammonia in compression-ignition engines poses challenges. To facilitate NH3 ignition, high-activity fuels are often employed to ignite the premixed NH3/air mixture and initiate combustion. This study specifically focuses on the ignition process of binary mixtures of NH3 and dimethyl ether (DME), considering that DME is a carbon-neutral high-activity fuel. By conducting zero-dimensional reaction kinetics analysis, we compare the ignition processes of DME and NH3/DME mixtures. The results reveal that the addition of NH3 has minimal impact on the control mechanism of DME's two-stage ignition process. DME still heavily relies on the proliferation of OH radicals in the low-temperature oxidation pathway, releasing heat during the reaction progression. As the temperature increases, the low-temperature oxidation branching pathways are gradually replaced by chain propagation pathways, resulting in a decrease in overall reaction activity. The reactivity and temperature rise rate of the reaction system is then controlled by the H2O2 loop mechanism prior to the thermal ignition. However, the presence of ammonia noticeably extends the ignition delay period of DME. Ammonia competes with OH radicals, essential for DME oxidation, thereby inhibiting DME ignition. Additionally, as the ignition reaction advances, the involvement of NH3 kinetics increases. For instance, nitrogen-containing species generated from NH3 oxidation, such as NO, NO2, and NH2, react with CH3OCH2 to form CH3OCHO, reducing the flux through the low-temperature oxidation pathway of DME. While ammonia reaction pathways also generate OH radicals, this comes at the expense of HO2 radicals and H radicals, ultimately leading to H2O2 production. Overall, these findings clearly demonstrate the substantial impact of ammonia addition on the ignition process of DME, emphasizing the necessity for further fundamental research to enhance our understanding of NH3/DME binary fuel ignition. Such insights are pivotal for improving the design and operation strategies of NH3/DME dual-fuel engines, thereby improving engine efficiency and reliability.

Experimental and Simulated Study of Ammonia Blending with DME Steam Reformed and Cracked Gases under Lean-Burn Condition

Study on ammonia/methanol blends with ammonia cracking for low-carbon combustion and NO reduction

Investigation of Ammonia Cracking Combined with Lean-Burn Operation for Zero-Carbon Combustion and NO/N2O/NO2 Improvements

Study of Combustion and NO Chemical Reaction Mechanism in Ammonia Blended with DME

Investigation of the Effect of Ammonia Addition on the Two-Stage Ignition Process of Dimethyl Ether Based on Chemical Kinetic Analysis

Modeling and Chemical Kinetic Analysis of Methanol and Reformed Gas (H2/CO2) Blending with Ammonia under Lean-Burn Condition

Enhancing and assessing ammonia-air combustion performance by blending with dimethyl ether

Chemical Kinetic and Behavior Study of the Cracked Gas of H2/N2 and DME Addition on Ammonia Combustion in Lean-Burn Condition

Chemical Kinetic Study of Methane Blended with Ammonia Cracked Gas at Elevated Temperature and Pressure

Visualization and simulation study of ammonia blending with hydrogen as combustion application in lean-burn condition

Modeling and chemical kinetic analysis of methanol and reformed gas (H 2 /CO 2 ) blending with ammonia under lean-burn condition

Experimental and numerical study on emission characteristics of NH 3 /DME/air flames in a premixed burner

Experimental and Numerical Study on Emission Characteristics of NH3/DME/air Flames in a Premixed Burner

Stage-wise Kinetic Analysis of Ammonia Addition Effects on Two-Stage Ignition in Dimethyl Ether

Numerical Investigation of the Effect of Ammonia Addition on the Performance of a Stoichiometric Operated Natural Gas Spark Ignition Engine

Numerical Study on the Combustion Properties of Ammonia/DME and Ammonia/DMM Mixtures

Combustion Enhancement of Ammonia by Co-Firing Dimethyl Ether/hydrogen Mixtures under Methane-Equivalent Calorific Value

A comparative study of effects of methane and hydrogen on ammonia combustion in air via reactive molecular dynamics

RANS simulations on combustion and emission characteristics of a premixed NH3/H-2 swirling flame with reduced chemical kinetic model

RANS simulations on combustion and emission characteristics of a premixed NH3/H2 swirling flame with reduced chemical kinetic model

Ammonia energy fraction effect on the combustion and reduced NOX emission of ammonia/diesel dual fuel