Combustion Enhancement of Ammonia by Co-Firing Dimethyl Ether/hydrogen Mixtures under Methane-Equivalent Calorific Value

Yuyang Li,Yi Zhang,Jun Fang,Zhongya Xi,Jianguo Zhang,Zundi Liu,Xiaoxiang Shi,Wei Li

DOI: https://doi.org/10.1016/j.combustflame.2024.113490

IF: 4.4

2024-01-01

Combustion and Flame

Abstract:Combustion enhancement is essential for actualizing the practical application of ammonia (NH3) which belongs to low-calorific-value fuels. In this work, a new NH3 enhancement strategy is proposed by co-firing NH3 with dimethyl ether (DME)/hydrogen (H2) mixtures under methane-equivalent calorific value (MECV), resulting in fuel mixtures with almost half contents contributed by DME and the rest contributed by NH3/H2. The laminar flame propagation is investigated at the initial temperature of 298 K and varying fuel contents, equivalence ratios, and initial pressures. A kinetic model of high-temperature NH3/DME/H2 combustion is constructed and validated against both the present laminar burning velocity (LBV) data and experimental data in literature. The co-firing can effectively enhance the combustion intensity and laminar flame propagation of NH3. For the fuel mixtures with less or more abundant H2, the DME or H2 chemistry plays the dominant role in the enhancement of fuel reactivity and laminar flame propagation, respectively. Pressure effects and fuel content effects are analyzed in detail, demonstrating apparent dependency on reaction circumstances. Compared with the NH3/H2 co-firing, co-firing NH3 with DME/H2 mixtures under MECV has much lower increments and generally smoother variations in normalized LBV with the decreasing NH3 content, which results from the over 80 % contributions of DME to the fuel volumetric calorific values. Test experiments in a gas turbine model combustor are also performed to investigate the performance in gas turbine combustion regime. The measured swirl combustion characteristics indicate enhanced fuel reactivity and combustion stability with the decreasing NH3 content, which can be associated with the observed trends of LBV in this work. Both the LBV and swirl combustion experiments indicate that the 40.0 %NH3/49.4 %DME/10.6 %H2 and 30.0 %NH3/50.1 %DME/19.9 %H2 mixtures behave generally the best among the six fuel mixtures in mimicking the combustion characteristics of methane, demonstrating the potential of NH3/DME/H2 mixtures to be a novel carbon-neutral alternative of methane in practical applications without the need of great mechanical retrofits.