Abstract:The ultra-long gravity heat pipe has a long heat transfer distance and narrow working fluid flow channel within its tube. Due to these unique design features, the vapor–liquid counter-flow and heat transfer characteristics of these heat pipes are more complex than those found in conventional-size heat pipes. This paper innovatively proposes the design of a segmented visualization window structure of an ultra-long gravity heat pipe, which successfully overcomes the challenge of visualizing the internal flow during operations. A visualization experimental platform, measuring 40 m in height with an inner diameter of 7 mm and the aspect ratio up to 5714, was built to investigate the evolving characteristics of two-phase flows with an increasing heat input and the impact of the phase change flow characteristics on the thermal performance of ultra-long gravity heat pipes. The results obtained can provide guidance for the development of the internal structure of ultra-long gravity heat pipes that are being applied in exploiting geothermal energy. The results show that, at low heat input (200 W, 250 W), there are separate flow paths between the condensate return and the steam, but the high hydrostatic pressure due to the height of the liquid injection results in the presence of an unsaturated working fluid with a higher temperature in the liquid pool area, which has a lower evaporation rate, limiting the heat transfer through the heat pipe. It is found that if increasing the heat input up to 300 W, the evaporative phase change in the heating section becomes intense and stable. At the same time, despite the intermittent formation of liquid columns in the adiabatic section due to the vapor–liquid rolls, which increases the resistance to the vapor–liquid counter-flow, the liquid columns are blocked for a short period of time, and the path of steam rises and the condensate return is smooth, which does not seriously affect the steam condensation and liquid return evaporation. At this point, the overall temperature of the heat pipe is evenly distributed along the tube and the heat transfer performance is optimal. When the heat input further increases (350 W, 400 W), a large amount of condensate is trapped in the upper part of the adiabatic section and the condensing section by long liquid plugs for a long time. At this point, the condensate flow back to the heating section is significantly reduced, and the steam is seriously prevented from entering the condensation section, resulting in a significant increase in the temperature gradient between the lower part of the evaporating section and the upper part of the adiabatic section and deterioration of the heat transfer performance.

Wavelet Analysis of Temperature Oscillation Signals in a Global Glass Pulsating Heat Pipe

Observation of Heat Transfer in Oscillating Flow Within A Circular Channel

Non-linear Analyses of Temperature Oscillations in a Closed-Loop Pulsating Heat Pipe

Study on the vertical oscillatory gas-liquid two-phase flow and heat transfer characteristics

Temperature and flow fluctuations in a quartz-glass oscillating heat pipe

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

Evaluation of the Heat Transfer Performance of a Device Utilizing an Asymmetric Pulsating Heat Pipe Structure Based on Global and Local Analysis

Visualization study of a high-temperature oscillating heat pipe using X-ray imaging

Experimental investigation of flow visualization and thermal performance of flat-plate single-loop pulsating heat pipes

Numerical Investigation on Two-Phase Water Density Wave Oscillations in a Pipe under Various Heating Conditions

Visualized Investigation of the Onset of Flow Boiling Dynamic Instabilities in a Horizontal Arranged Tube under a High-Temperature Thermal Storage Boundary Condition

Experimental Investigation of the Visualization of Pulsating Heat-pipe Operation as well as Heat Transfer and Flow Characteristics

Investigation of Thermal Characteristics and Two-Phase Flows of a Star-Shape Thin Heat Pipe

Experimental and simulation study on flow heat transfer characteristics of flat pulsating heat pipe with wide and narrow interphase channels

FLOW AND HEAT TRANSFER CHARACTERISTICS IN NANOFLUID OSCILLATING HEAT PIPES

Analysis of chaotic flow in a 2D multi-turn closed-loop pulsating heat pipe

An experimental investigation of oscillatory heat transfer in helical coiled tube with steam water two phase density wave oscillation flow

Two-Phase Flow Visualization and Heat Transfer Characteristics Analysis in Ultra-Long Gravity Heat Pipe

Transient Numerical Investigation of a Thermal-Driving Water Pipe Cooling System

Numerical investigation and mechanism analysis of heat transfer enhancement in a helical tube by square wave pulsating flow

AN EXPERIMENTAL INVESTIGATION OF OSCILLATORY HEAT TRANSFER IN HELICAL COILED TUBE WITH STEAM WATER TWOPHASE DENSITY WAVE OSCILLATION FLOW