Abstract:Replacing liquid electrolytes with solid ionic conductors attracts increasing attention due to the potential of improved battery safety. Solid-state batteries show potential for further increased energy/power density by eliminating the use of packaging accessories for unit cells. Sulfide- and halide-based ceramic ionic conductors exhibit comparable ionic conductivity with liquid electrolytes. These materials, however, are inherently brittle, making them unfavorable for applications. Here, we report a mechanically enhanced composite Na+ conductor that contains 92.5 wt% of sodium thioantimonate (Na3SbS4, NSS) and 7.5 wt% of sodium carboxymethylcellulose (CMC); the latter serves as the binder and an electrochemically inert encapsulation layer. The ceramic and binder constituents were integrated at the particle level, providing ceramic NSS-level Na+ conductivity in the NSS-CMC composite, the more than five-fold decrease of electrolyte thickness obtained in NSS-CMC composite electrolytes provided a five-fold increase in Na+ conductance compared to NSS ceramic pellets. Resulting from the CMC encapsulation, this NSS-CMC composite shows increased moisture resistivity and electrochemical stability, which significantly promotes the cycling performance of NSS- based solid-state batteries, and improves ductility of the material. This work demonstrates a well-controlled, orthogonal process of ceramic-rich, composite electrolyte processing – independent streams for ceramic particle formation along and binder encapsulation in a solvent-assisted environment. This work provides insights into the interplay among the solvent, the polymeric binder, and the ceramic particles in composite electrolyte synthesis, and implies the critical importance of identifying the appropriate solvent/binder system for the precise control of this complicated process. Finally, the work also provides valuable insights into the potential of designing mechanically tailorable battery components via fundamental understanding of the effect of the constituents on the overall composite ductility.

High Ionic Conductive Sodium Β-Alumina (SBA) and SBA-NaPF6 Composite Solid Electrolytes Prepared by Cold Sintering Process

Cold-sintering assisted process enables densified and robust fine-grained Li1.3Al0.3Ti1.7(PO4)3 electrolytes for solid-state batteries

Insight into the Microstructure and Ionic Conductivity of Cold Sintered NASICON Solid Electrolyte for Solid-State Batteries

Development of the Cold Sintering Process and Its Application in Solid-State Lithium Batteries

Microstructure and ion conductivity of Al‐LLZO solid electrolyte prepared by molten salt and cold sintering process

Microstructure and ionic conductivities of NASICON-type Li1.3Al0.3Ti1.7(PO4)3 solid electrolytes produced by cold sintering assisted process

Optimization of sintering process on Li1+Al Ti2-(PO4)3 solid electrolytes for all-solid-state lithium-ion batteries

High-Performance All-Solid-State Na-S Battery Enabled By Casting-Annealing Technology

Liquid-phase sintering enabling mixed ionic-electronic interphases and free-standing composite cathode architecture toward high energy solid-state battery

Synthesis and characterization of high ionic-conductive sodium beta-alumina solid electrolyte derived from boehmite

Si3N4-Assisted Densification Sintering of Na3Zr2Si2PO12 Ceramic Electrolyte toward Solid-State Sodium Metal Batteries

A Cellulose Encapsulated Composite Electrolyte Design: Towards Chemically and Mechanically Enhanced Solid-sodium Batteries

Fast Ion Conduction Nanofiber Matrix Composite Electrolyte for Dendrite‐Free Solid‐State Sodium‐Ion Batteries with Wide Temperature Operation

Nanofiber Matrix Composite Electrolyte for Regulating Ion Distribution in Fast Kinetic Sodium-ion Batteries Operating at Wide Temperatures

Tungsten and Boron Codoping toward High Ionic Conductivity and Stable Sodium Solid Electrolyte for All-Solid-State Sodium Batteries

Plastic Crystal Polymer Electrolytes Containing Boron Based Anion Acceptors for Room Temperature All-Solid-state Sodium-Ion Batteries

Cold Sintering of Li6.4La3Zr1.4Ta0.6O12/PEO Composite Solid Electrolytes

High‐Temperature Ultrafast Sintering: Exploiting a New Kinetic Region to Fabricate Porous Solid‐State Electrolyte Scaffolds

Stabilizing the NASICON Solid Electrolyte in an Inert Atmosphere as a Function of Physical Properties and Sintering Conditions for Solid-State Battery Fabrication

Low-Sintering-Temperature Garnet Oxides by Conformal Sintering-Aid Coating

Conductivity behavior of Na5YSi4O12 and its typical structural analogues by solution-assisted solid-state reaction for solid-state sodium battery