Abstract:The use of industrial robots in precision machining operations, such as milling, is of growing interest in aerospace manufacturing and assembly due to its potential flexible workflow and efficiency benefits. However, serial link robot manipulators are inherently less stiff than CNC machine tools, and their Cartesian stiffness is pose-dependent, which contributes to machining inaccuracies. While research exists to compensate for these deficiencies, such as offline and online position error compensation techniques, a compensation approach that combines process force-induced deflection errors during robot trajectory planning with real-time position error feedback control using an external sensor is lacking. This paper presents a process force-induced deflection-limited trajectory planning approach to improve the machining accuracy in robotic milling through variable feed rate trajectory generation and real-time position error feedback control for curvilinear trajectories. The proposed methodology generates a process-aware trajectory by adjusting the feed rate to adhere to a user-defined static deflection limit while ensuring compatibility with an external real-time closed-loop position feedback control system interfaced with the robot controller. Experimental investigations are carried out on a six degrees-of-freedom industrial robotic milling system with real-time closed-loop laser tracker-based feedback. The experimental results demonstrate that the deflection-limited variable feed rate trajectory yields improved part accuracy compared to a constant feed rate approach. Moreover, the closed-loop system executing the variable feed rate trajectory is shown to yield superior performance compared to the native robot controller utilizing native motion types. These findings highlight the significance of a process-dependent trajectory planner, and a generalization of its application is proposed.

Inverse Kinematics Model and Trajectory Generation of a Dual-Stage Micro Milling Machine

Kinematic Modeling and Inverse Kinematics Solution of a New Six-Axis Machine Tool for Oval Hole Drilling in Aircraft Wing Assembly

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Path Planning for Support Heads in Mirror-Milling Machining System

Five-axis trajectory generation based on kinematic constraints and optimisation

Inverse kinematics solution of a new circumferential drilling machine for aircraft assembly

Realization of Two-Axis Macro-Micro Dual-Driven System

A parallel 3-DOF micro-nano motion stage for vibration-assisted milling

Deflection-limited trajectory planning in robotic milling

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

Inverse kinematics for a novel hybrid parallel–serial five-axis machine tool

Feedrate scheduling of a five-axis hybrid robot for milling considering drive constraints

A novel collision-free NC code generation method with fixed tool orientation vector using the geometric decoupling strategy based on the three rotary axes milling head

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

Kinematic modelling of a 3-axis NC machine tool in linear and circular interpolation

High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolation

Kinematic Analysis of the SPKM165, a 5-Axis Serial-Parallel Kinematic Milling Machine

Direct trajectory optimization of macro–micro robotic system using a Gauss pseudospectral framework

Driving Force Constraint Corner Smoothing Method For Highspeed Machine Tools

Trajectory Planning and Optimization for Robotic Machining Based On Measured Point Cloud