Abstract:Geopolymer composites can be used as a proper substitute for ordinary Portland cement, which can reduce carbon dioxide (CO2) emissions and make rational use of industrial waste. In this study, an investigation of the workability and compressive strength of geopolymer composites was carried out through a series of experiments, such as slump flow test, consistency meter test and compressive strength test, to clarify the interaction mechanism among superplasticizer (SP), polyvinyl alcohol (PVA) fiber, nano-SiO2 (NS) and geopolymer composites, thereby improving the properties of engineered composites. The results showed that with the increase in PVA fiber content, the flowability of geopolymer composites decreased, while the thixotropy increased. With the increase in the NS content, the flowability of geopolymer composites first increased and then decreased, reaching its best at 1.0%, while the thixotropy was the opposite. With the increase in the SP content, the flowability of geopolymer composites increased, while the thixotropy decreased. A significant correlation between thixotropy and flowability of geopolymer composites was found (R2 > 0.85). In addition, the incorporation of single PVA fiber or NS significantly improved the compressive strength of geopolymer composites. Specifically, the compressive strength of geopolymer composites with 0.8% content PVA fiber (60.3 MPa) was 33.4% higher than that without PVA fiber (45.2 MPa), and the compressive strength of geopolymer composites with 1.5% content NS (52.6 MPa) was 16.4% higher than that without NS (45.2 MPa). Considering the synergistic effect, it is found that the compressive strength of geopolymer composites (58.5–63.3 MPa) was significantly higher than that without PVA fiber (45.2–52.6 MPa). However, the flowability and compressive strength of geopolymer composites were only slightly improved compared to that without NS. With the increase in the SP content, the compressive strength of geopolymer composites showed a trend of a slight decrease on the whole. Consequently, the results of this study may be useful for further research in the field of repair and prevention of the delamination of composite structures.

Impact of Surface Treatment on the Strengthening of Geopolymer Composites Reinforced with Short Sisal Fibers

Effect of Fiber Treatments on the Mechanical Properties of Sisal Fiber-Reinforced Concrete Composites

Effect of self-treatment process on properties of natural fiber-reinforced geopolymer composites

Study of the Effects of Alkali Treatment and Fiber Orientation on Mechanical Properties of Enset/Sisal Polymer Hybrid Composite

Effects of Fiber Surface Pretreatment and Composite Post-treatment on Mechanical Properties of 2D-Cf /phosphate Geopolymer Matrix Composites

Influence of fiber treatment methods on the mechanical properties of high strength concrete reinforced with sisal fibers

Evaluation of the 12–24 mm basalt fibers and boron waste on reinforced metakaolin-based geopolymer

Preparation, characterization, electrical conductivity, and life cycle assessment of carbon nanofibers-reinforced Ecuadorian natural zeolite-based geopolymer composites

Effect of Single and Synergistic Reinforcement of PVA Fiber and Nano-SiO2 on Workability and Compressive Strength of Geopolymer Composites

Effect of Fiber Modified by Alkali/polyvinyl Alcohol Coating Treatment on Properties of Sisal Fiber Plastic Composites

Effect of Na + alkaline activation on the geopolymerization of a pure metakaolin at room temperature

Investigation and chemical processing effect of sisal fiber epoxy composite characteristic enhancement with nano-SiC via injection mold

Mechanical, free vibration, electrical, and water absorption properties of vinyl ester composites reinforced with Phoenix sp. fibers: Influence of eco‐friendly sodium bicarbonate treatment

Effects of Different Types of Fibers on the Physical and Mechanical Properties of MICP-Treated Calcareous Sand

Impact of Nano-CaCO3 and PVA Fiber on Properties of Fresh and Hardened Geopolymer Mortar

Alkali treatment of bamboo fibers improves the mechanical properties of metakaolin geopolymer

The effect of eco-friendly chemical treatment on sisal fiber and its epoxy composites: thermal, mechanical, tribological and morphological properties

Influence of fiber surface treatment on the mechanical properties of sisal fiber reinforced polylactic acid bio-composites

Evaluating Sisal Fiber-Reinforced Gypsum Composites for Water Absorption and Mechanical Performance

Preparation and Performances of Geopolymer-Based Plant Fiber Composites

Study on the Reinforced Properties of Geopolymer Fibers with a Sustainable Development Role