Abstract:Ultrasonic wedge bonding of aluminum (Al) wires is a widely applied interconnect technology for power elec-tronic packaging. The joint quality of the wedge bonding is mainly affected by the process parameters and material properties. Inappropriate process parameters will lead to failure modes such as chip surface pit, metal layer peeling off, wire cracking, non-sticking to the pad, etc., which limits the long-term stability of power devices. In order to reach the desired reliability, the design of experiment (DoE) is generally deployed which is costly in terms of time and related materials. Therefore, simulation-assisted analysis is in demand to rapidly narrow down the process windows. In this paper, an ultrasonic bonding model involving thick Al wires (300 mu m) was established based on the Finite Element Method (FEM), to optimize process parameters effectively with reduced time and cost. The model was designed in ANSYS utilizing the transient structural mechanics module with various stresses and ultrasonic power, to simulate the relative deformation of the bonded wires and the displacement against the substrate. The result was then verified by ultrasonic wedge bonding samples with 9 sets of process parameters. The stress distributions were simulated and analyzed with the failure modes of tensile strength tests, while the deformation of wires under various process parameters was measured and compared with shear strength tests. Further, the relationship between the failure modes of the joint and the deformation was then analyzed by Response Surface Method (RSM), and the regression equation of the wire deformation and related process parameters was established and fitted with the actual sample's data. Such analysis not only found the optimum range of the deformation of thick Al ultrasonic wire bonds but also quickly provided a range of optimized processes for Al thick wires applying ultrasonic wedge bonding techniques.

Design, Evaluation and Experiment of a Dual-Frequency Ultrasonic Transducer for Aluminum Wedge Bonding

Study on Electro-Thermo-Mechanical Responses of Bonding Wires Arrays Used for the Package Design of Ldmosfet-Based Rf Amplifier

Finite element modeling and analysis of ultrasonic bonding process of thick aluminum wires for power electronic packaging

Development and Prospect of Ultrasonic Bonding Transducer

Finite element analysis on ultrasonic propagation of interface bonding of bimetal composites

ACOUSTIC PROPERTIES OF Pb-17Li ALLOY FOR ULTRASONIC DOPPLER VELOCIMETRY

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

Design and Experiment Study of Ultrasonic Longitudinal-Torsional Compound Consolidation Vibration System for Metal Foil

Design of piezoelectric torsional transducer of hybrid transducer type USM and analyses of its properties

Fabrication Process and Performance Analysis of AlN Based Piezoelectric Micromachined Ultrasonic Transducer with a Suspended Structure.

Design of a novel integrated ultrasonic tool holder for friction stir welding

Experimental and Numerical Investigation of the Use of Ultrasonic Waves to Assist Laser Welding

An Aln-Based Piezoelectric Micromachined Ultrasonic Transducer with a Double-Beam Suspended Structure

Optimized Design of High-Temperature Resistant Air-Coupled Ultrasonic Transducer (ACUT) Based on Single Acoustic Matching Layer

Ultrasonic non-destructive evaluation study of molecular diffusion bonding of thin copper-aluminum electrode sheets

Design and Application of Ultrasound Focused Transducer for the Ultrasonic Feature Imaging Testing System

Design and experimental study of longitudinal-torsional ultrasonic transducer with helical slots considering the stiffness variation

Design and test of a small high frequency ultrasonic cleaning transducer

Ultrasonic-enhanced silver‐indium transient liquid phase bonding in advancing rapid and low-temperature packaging

Design and Application of Partial Immersion Focused Ultrasonic Transducers for Austenitic Weld Inspection

Ultrasound-assisted friction stir transient liquid phase spot welded dissimilar copper-aluminum joint