Abstract:The rock formations in oil and gas reservoirs are predominantly composed of laminated shale, which contains various defects such as pores and fractures. These defects have a significant impact on the stability of wellbore walls. As a result, this study utilized rock samples from a specific oil and gas reservoir and introduced pre-existing pore and fracture defects within them. Uniaxial compression tests were conducted on rock specimens with varying angles between the fractures and the bedding planes. The study involved measuring and analyzing the impact of pre-existing defect morphology on shale’s mechanical properties. Additionally, through the use of digital image correlation (DIC) technology, a comprehensive strain field map was obtained, depicting the initiation, propagation, and ultimate failure of surface cracks in shale under loading conditions. This allowed for both qualitative and quantitative analysis of the connection between shale’s damage and failure processes and the evolution of strain fields. Ultimately, this research provides a theoretical basis for wellbore stability and the development of shale oil and gas fields. Conclusions drawn from the study are as follows. With an increase in fracture angle, the rock’s elastic modulus gradually increases, and both compressive strength and strain exhibit a pattern of higher values on both ends and lower values in the middle. When the fracture angle is less than 30°, significant stress concentration occurs at the tip of the fracture. When the angle exceeds 60°, stress concentration around pores dominates. In the range of 30° to 60°, there is a combined stress concentration around both pores and fractures, significantly reducing rock stability. Crack propagation is influenced by bedding planes and exhibits varying degrees of ductility, ultimately resulting in a tension-shear mixed failure. When fractures are parallel to bedding planes (angle = 0°), defects are symmetrically distributed, and stress concentration at the fracture tip dominates, leading to crack initiation from the fracture tip and eventually forming an “H”-shaped tensile failure. When fractures are perpendicular to bedding planes (angle = 90°), stress concentration around pores is greater than at the fracture tip, causing cracks to initiate around pores and eventually collapsing on one side of the fracture.

Asymmetric Failure Mechanisms of Anisotropic Shale under Direct Shear

Anisotropic characteristics of acoustic emission and the corresponding multifractal spectrum during progressive failure of shale under cyclic loading

Anisotropic Strength and Failure Behaviors of Transversely Isotropic Shales: an Experimental Investigation

Acoustic Emission Characteristics and Cracking Mechanism Analysis of Anisotropic Shale Containing a Circular Hole under Uniaxial Compression

Acoustic Emission Pattern of Shale under Uniaxial Deformation

Mechanical Anisotropy Associated with Beddings in Shale under Brazilian Test Conditions: Insights from Acoustic Emission Statistics

Anisotropic Characteristics of Crack Initiation and Crack Damage Thresholds for Shale

3D anisotropic microcracking mechanisms of shale subjected to direct shear loading: A numerical insight

Mechanical Behavior, Energy Evolution and Damage Mechanism of Anisotropic Shale under Triaxial Multilevel Cyclic Loading: an Experimental Investigation

Experimental Study of Direct Shear Properties of Anisotropic Reservoir Shale

Experimental Investigation on the Fracture Behaviour of Black Shale by Acoustic Emission Monitoring and CT Image Analysis During Uniaxial Compression

Mechanical Properties and Dynamic Multifractal Characteristics of Shale under Anisotropic Stress Using AE Technology

Anisotropic Characterization of Mechanical Behavior and Fracture Morphology in Marine and Continental Shales under Uniaxial Compression: A Comparative Analysis

Effect of Layer Orientation on Acoustic Emission Characteristics of Anisotropic Shale in Brazilian Tests

Thermal Effects on Mechanical and Failure Behaviors of Anisotropic Shale Subjected to Direct Shear

Anisotropic microscale failure mechanism of shale

ANISOTROPY OF SHEAR STRENGTH OF SHALE BASED ON DIRECT SHEAR TEST

Anisotropy and Microcrack-Induced Failure Precursor of Shales under Dynamic Splitting

Experimental Investigation of Anisotropic Fatigue Characteristics of Shale under Uniaxial Cyclic Loading

Study on the Damage and Failure Process of Prefabricated Hole-Fracture Combination Defects in Shale

Experimental Investigation on the 3D Anisotropic Fracture Behavior of Layered Shales Under Mode-I Loading