Abstract:The mechanical properties of shale are generally influenced by in situ geological conditions. However, the understanding of the effects of in situ geological conditions on the mechanical properties of shale is still immature. To address this problem, this paper provides insight into the elasticity and characteristic stress thresholds (i.e., the crack closure stress σcc, crack initiation stress σci, and crack damage stress σcd) of shales with differently oriented bedding planes under deep in situ geological conditions. To accurately determine the elastic parameters and crack closure and initiation thresholds, a new method-i.e., the bidirectional iterative approximation (BIA) method-which iteratively approaches the upper and lower limit stresses of the linear elastic stress-strain regime, was proposed. Several triaxial compression experiments were performed on Longmaxi shale samples under coupled in situ stress and temperature conditions reflecting depths of 2000 and 4000 m in the study area. The results showed that the peak deviatoric stress (σp) of shale samples with the same bedding plane orientation increases as depth increases from 2000 m to 4000 m. In addition, the elastic modulus of the shale studied is more influenced by bedding plane orientation than by burial depth. However, the Poisson's ratios of the studied shale samples are very similar, indicating that for the studied depth conditions, the Poisson's ratio is not influenced by the geological conditions and bedding plane orientation. For the shale samples with the two typical bedding plane orientations tested (i.e., perpendicular and parallel to the axial loading direction) under 2000 and 4000 m geological conditions, the ratio of crack closure stress to peak deviatoric stress (σcc/σp) ranges from 24.83% to 25.16%, and the ratio of crack initiation stress to peak deviatoric stress (σci/σp) ranges from 34.78% to 38.23%, indicating that the σcc/σp and σci/σp ratios do not change much, and are less affected by the bedding plane orientation and depth conditions studied. Furthermore, as the in situ depth increases from 2000 m to 4000 m, the increase in σcd is significantly greater than that of σcc and σci, indicating that σcd is more sensitive to changes in depth, and that the increase in depth has an obvious inhibitory effect on crack extension. The expected experimental results will provide the background for further constitutive modeling and numerical analysis of the shale gas reservoirs.

Anisotropic Characteristics of Crack Initiation and Crack Damage Thresholds for Shale

Study on the Damage and Failure Process of Prefabricated Hole-Fracture Combination Defects in Shale

Research on the anisotropic fracture behavior and the corresponding fracture surface roughness of shale

Asymmetric Failure Mechanisms of Anisotropic Shale under Direct Shear

Anisotropic Strength and Failure Behaviors of Transversely Isotropic Shales: an Experimental Investigation

Anisotropic microscale failure mechanism of shale

Elasticity and Characteristic Stress Thresholds of Shale under Deep In Situ Geological Conditions

3D anisotropic microcracking mechanisms of shale subjected to direct shear loading: A numerical insight

Anisotropic Characterization of Mechanical Behavior and Fracture Morphology in Marine and Continental Shales under Uniaxial Compression: A Comparative Analysis

Anisotropic Creep Characteristics and Mechanism of Shale under Elevated Deviatoric Stress

Experimental study on crack propagation and failure mode of fissured shale under uniaxial compression

Linear Elastic Fracture Mechanics Characterization of an Anisotropic Shale

Anisotropy and Microcrack-Induced Failure Precursor of Shales under Dynamic Splitting

Experimental Investigation of Anisotropic Fatigue Characteristics of Shale under Uniaxial Cyclic Loading

Anisotropic failure behaviour and breakdown pressure interpretation of hydraulic fracturing experiments on shale

Anisotropic Mechanism and Characteristics of Deformation and Failure of Longmaxi Shale

Effects of Strain Rate and Bedding on Shale Fracture Mechanisms

Acoustic Emission Characteristics and Cracking Mechanism Analysis of Anisotropic Shale Containing a Circular Hole under Uniaxial Compression

Anisotropy Characterization of the Elasticity and Energy Flow of Longmaxi Shale under Uniaxial Compression

Experimental investigation on the anisotropy of mode-I fracture and tensile failure of layered shale

Anisotropic characteristics of the energy index during the shale failure process under triaxial compression