Abstract:Carbon fiber paper (CFP) is one of the most widely used gas diffusion layer materials for proton exchange membrane fuel cells (PEMFC) due to its excellent properties such as high conductivity, high strength, high air permeability and corrosion resistance. In this study, CFP was prepared using the phenolic resin (PF) in-pulp addition method. The effect of PF content on the properties of hot-pressed paper (HPP) and CFP was investigated. The results showed that when the dosage of polyethylene oxide (PEO) was 1.5 wt%, the flocculation effect of PEO on PF was basically complete, and the water filterability and retention of carbon fiber pulp were relatively optimal. After HPP was carbonized into CFP, the hydrophobicity, average pore size, porosity, and air permeability increased, while the resistivity and tensile strength decreased. With the increase of PF content, the tensile strength of CFP gradually increased, while the average pore size, porosity, air permeability and resistivity decreased. When the PF content was 250 wt%, the average pore size of CFP was 36.5 μm, the water contact angle was 127°, the porosity was 69.7%, the air permeability was 7.81 × 10 3 mL mm/(cm 2 ·h·mmHg), the resistivity was 21.1 mΩ cm, and the tensile strength was 15.7 MPa. In addition, the CFP prepared using PF in-pulp addition method had a relativity uniform pore size distribution and high air permeability. Therefore, this work shows that the CFP prepared using this technique exhibits excellent comprehensive performance, and enables the manufacturing of CFP to be more efficient, low-cost, and environmentally friendly.

Polydopamine Modified Carbon Fiber to Improve the Comprehensive Properties of Carbon Paper for Proton Exchange Membrane Fuel Cell

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

Synergistically improve the strength and porosity of carbon paper by using a novel phenol formaldehyde resin modified with cellulose nanofiber for proton exchange membrane fuel cells

Carboxyl-Terminated Butadiene-Acrylonitrile-Modified Carbon Paper for Use of Gas Diffusion Layer in Pem Fuel Cells

Influence of Graphite Powder on the Properties of Carbon Paper for Proton-Exchange Membrane Fuel Cells

Optimal Fabrication of Carbon Paper by Different Lengths of Chopped Carbon Fibers and Its Enhanced Performance in Proton Exchange Membrane Fuel Cell

Preparation and Characterization of Dopamine-Modified Carbon Fiber Paper Composites for Gas Diffusion Layers

Polythiophene-film-modified ultrathin carbon fiber paper for fuel cells

Improved Properties of Carbon Fiber Paper As Electrode for Fuel Cell by Coating Pyrocarbon Via CVD Method

Performance Enhancement of Proton Exchange Membrane Fuel Cell through Carbon Nanofibers Grown In Situ on Carbon Paper

Effect of PVB modiifed phenolic resin on properties of PEMFC carbon paper

Durability Improving and Corrosion-Resistance Mechanism of Graphene Oxide Modified Ultra-Thin Carbon Paper Used in PEM Fuel Cell

Graph Theory Model and Mechanism Analysis of Carbon Fiber Paper Conductivity in Fuel Cell Based on Physical Structure

Efficient preparation and characterization of carbon fiber paper using phenolic resin in-pulp addition method

Graphene oxide modified carbon fiber paper used in proton exchange membrane fuel cells

Preparation of Carbon Paper for Proton Exchange Membrane Fuel Cell

Highly flat and highly homogeneous carbon paper with ultra-thin thickness for high-performance proton exchange membrane fuel cell (PEMFC)

Carbon paper fabricated by molding and CVD process for PEMFC application

Investigation of Pyrocarbon Based Carbon Paper for Proton Exchange Membrane Fuel Cells

Graphene Oxide Reinforced Ultra-Thin Carbon Paper Used for Fuel Cells and the Mechanisms of Reinforcement