Abstract:One of the difficulties to retain Pt interfacial structure during PEMFC operation is arose from the high activity and large surface energy of the Pt nanoparticle, which facilitate i) Ostwald ripening, where the Pt particle size increases by a dissolution-redeposition process upon redox cycling and ii) agglomeration of Pt nanoparticles by sintering. These phenomena lead to the loss of Pt interfacial area and deteriorate the PEMFC performance. In addition, stability of carbon supports used as an electron conductive Pt supporting material is also essential to improve Pt stability since carbon corrosion catalyzed by Pt also takes place at a high potential (mainly over 1.0 V), which triggers the detachment of Pt and subsequent agglomeration. Thus, the use of durable carbon supports against the oxidation is crucial to increase the PEMFC durability. Since it is known that sp2 carbons are more thermodynamically stable than sp3 carbons upon oxidation, the use of highly graphitized carbons such as carbon nanotubes (CNTs) have been investigated to employ and it is proved that the use of such carbons mitigates the Pt agglomeration and thus enhance the PEMFC durability. However, an absence of the anchoring sites for Pt deposition on such graphitized carbon surface such as -OH and -COOH connected on sp3 carbons make the uniform deposition of Pt nanoparticles rather difficult. And it is pointed out that the weak interaction between the graphitized carbon surface and Pt nanoparticles often induces the sintering of Pt particles and, therefore the improvement of the Pt‒carbon interfacial strength will further improve the Pt stability. Although, general strategy to introduce anchoring sites for the highly graphitized carbons is to oxidize the surface by harsh chemical or physical treatments, such oxidation always involved the introduction of the sp3 sites and resulted in the decrease of the durability of carbon supports. We have developed smart method to introduce anchoring sites without creating sp3 carbons on the highly graphitized carbon surface, where the carbons are coated by polymer having anchoring sites for metal ions. In this method, polymer such as polybenzimidazole (PBI) is coated on the pristine (non-oxidized) carbons and can act as the anchoring site for the Pt deposition. Therefore, Pt can be deposited onto the surface of highly graphitized carbon such as CNTs without oxidizing the CNTs. Indeed, we reported that PEMFC having PBI-coated CNT as a carbon support showed excellent durability upon fuel cell accelerated durability test (ADT) between 1.0 ‒ 1.5 V. In that research, oxidized-CNT was used as a comparison since direct Pt deposition onto the pristine CNT was rather difficult and, in addition, we used the ADT protocol designed to degrade the carbon (1.0 – 1.5 V). Thus, we successfully demonstrated the advantage of the PBI coating to preserve inherent carbon durability but the effect of the PBI coating for the Pt stability was not investigated. We also demonstrated that the PBI-coating on Vulcan could enhance the durability of Vulcan-based PEMFC. However, in that research, PBI coating improved Vulcan stability mainly because the coverage of micropore of Vulcan decelerated the oxidation of the carbon surface during the ADT between 1.0 ‒ 1.5 V. Therefore, the effect of PBI coating for the stability of Pt particles was not observed. In this study, to clarify the effect of PBI coating for Pt stability and PEMFC durability, ADT between 0.6 ‒ 1.0 V designed to study Pt stability was applied for the PEMFC having PBI-coated carbons as a carbon support. Here, Acetylene Black (AB) was chosen as the carbon support since 1) AB shows high electrochemical stability due to their high crystallinity and Pt sintering triggered by the carbon corrosion during the ADT can be avoided and 2) direct Pt deposition on AB was possible and no oxidation pretreatment is necessary for the reference samples. As the result, we found that MEA employing PBI-coated AB shows only 8% decrease in the maximum power density, while MEA containing non-coated AB shows 34% decrease after the ADT. Structural analysis of the electrocatalysts after the ADT reveals that the PBI anchors both Pt nanoparticle and ionomer upon ADT and maintains their interfacial structure. We conclude that the polymer-coating method is promising both for the improvement of the durability and the activity of the PEMFC.

Effect of PVB modiifed phenolic resin on properties of PEMFC carbon paper

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

Preparation of Gas Diffusion Carbon Paper and Its Uniformity Analysis

Synergistically improve the strength and porosity of carbon paper by using a novel phenol formaldehyde resin modified with cellulose nanofiber for proton exchange membrane fuel cells

Diazoniabicyclo-type Poly (ionic Liquid) Cross-Linked Polybenzimidazole Membrane with Improved Phosphoric Acid Retention for HT-PEMFCs

Influence of carbon paper on self humidifying performance of PEMFC

Efficient preparation and characterization of carbon fiber paper using phenolic resin in-pulp addition method

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Role of Fiber Length and Pore Former on the Porous Network of Carbon Paper Electrode and its Performance in PEMFC

Highly flat and highly homogeneous carbon paper with ultra-thin thickness for high-performance proton exchange membrane fuel cell (PEMFC)

Gel-state Polybenzimidazole Proton Exchange Membranes with Flexible Alkyl Sulfonic Acid Side Chains for a Wider Operating Temperature Range (25–240 °C)

Phosphoric Acid Doped Composite Membranes from Poly (2,5-Benzimidazole) (ABPBI) and CsxH3−xPW12O40/CeO2 for the High Temperature PEMFC

Polyvinylidene fluoride effects on the electrocatalytic properties of air cathodes in microbial fuel cells

Modifications on Promoting the Proton Conductivity of Polybenzimidazole-Based Polymer Electrolyte Membranes in Fuel Cells

Experimental and numerical investigations of the effects of PBI loading and operating temperature on a high-temperature PEMFC

Structure and Properties of Carboxylated Carbon Nanotubes@Expanded Graphite/Polyethersulfone Composite Bipolar Plates for PEM

Performance Enhancement of Proton Exchange Membrane Fuel Cell through Carbon Nanofibers Grown In Situ on Carbon Paper

Preparation of PBI membranes with controlled thickness for use in PEMFCs and the impact on water and phosphoric acid uptake

Effect of Polybenzimidazole Coating on Acetylene Black for Durability of Polymer Electrolyte Membrane Fuel Cell

Enhancement of Mass Transport in Catalyst Layers of HT-PEMFC with Tetrafluorophenyl Phosphonic Acid Binder