Abstract:A significant number of cryogenic low-noise amplifiers (cryo-LNAs) are required for the readout of superconducting nanowire detector (SNWD) arrays. It is desirable to have compact cryo-LNAs in place so that the size of the readout circuitry for the SNWD array can be reduced. In this study, we first examined the bandwidth, linearity, and noise requirements of the cryo-LNA for SNWD readout. After that, the design and implementation of a wideband silicon–germanium (SiGe) BiCMOS cryo-LNA were described in detail. The LNA features two cascode stages with resistive shunt–shunt feedback for wideband input impedance matching. The capacitive peaking techniques and emitter inductive degeneration via a slab inductor were utilized to increase the bandwidth without compromising the layout’s compactness. To ensure the amplifier works well at cryogenic temperatures, we modified the model parameters from the foundry-provided models based on the device’s reported cryogenic test data. The measurement results at 3.6 K demonstrate that the cryo-LNA, occupying a core size of only 0.03 mm2, achieves a noise-equivalent temperature (NET) of 4–10 K and an average gain of 30.5 dB in the frequency band from 0.1 to 8.8 GHz, under a power consumption of 8.2 mW. We successfully integrated this LNA with a quantum sensor array on a printed circuit board (PCB) and obtained favorable test results, demonstrating the potential application of LNAs for reading large-scale SNWDs.

0.5-8.5 GHz Cryogenic Low Power Consumption Amplifiers for Superconducting SIS Mixer-based Water Vapour Radiometer Applications

Development of a Low-power Consumption Cryogenic MMIC LNA for Immediate Connection with an SIS Mixer

A Cryogenic Sige Low Noise Amplifier Developed for Radio Astronomy

An SIS-mixer-based Amplifier for Multi-Pixel Heterodyne Receivers

Development of a Low-Power Cryogenic MMIC HEMT Amplifier for Heterodyne Array Receiver Application

A 60–90 GHz Mixer-First Receiver with Adaptive Temperature-Compensation Technique

A 385-500 GHz Low Noise Superconductor-Insulator- Superconductor Mixer for ALMA Band 8.

Cryogenic Low Noise Amplifier for VHF Band Applied in Superconducting Filter

A Low-Power, Inductorless Wideband Cryogenic Amplifier for Superconducting Nanowire Single Photon Detector

Design and Measurement of P Band Cryogenic Low Noise Step Amplifier

Characteristics Of Low Noise 800mhz Amplifier At Cryogenic Temperature

A 16 GHz Bandwidth Cryogenic IF Amplifier with 4-K Noise Temperature for Sub-mm Radio-Astronomy Receivers

A Compact 500ghz SIS Receiver Developed for Space Observations

Design And Fabrication Of Cryogenic Low Noise Amplifier In Low Rf Band

A 0.32 $\times$ 0.12 mm$^{2}$ Cryogenic BiCMOS 0.1–8.8 GHz Low Noise Amplifier Achieving 4 K Noise Temperature for SNWD Readout

Cryogenic Modeling of GaAs-pHEMT and its Application in Low-power MMIC CLNA Design for Radio Astronomy

Low-Noise 0.5 Thz All-Nbn Superconductor-Insulator-Superconductor Mixer for Submillimeter Wave Astronomy

Development of cryogenically-cooled low noise amplifier for mobile base station receivers

Noise Performance of a 200–280 GHz Mixer with Nb-AlN-NbN Superconducting Tunnel Junctions

A 47K Noise Temperature CMOS S-band LNA for Cryogenic Applications

VHF/UHF Cryogenic LNA for Deep Space Exploration and Radio Astronomy