Abstract:This paper has explored an ultra-low-power design of two 60-GHz direct-conversion receivers in a 65-nm CMOS process for single-channel and multi-channel applications under the IEEE 802.15.3c standard, respectively. One subthreshold biasing 0.4-V transconductance mixer is designed with a compact quadrature hybrid coupler (160 μm × 210 μm with measured 3-dB intrinsic loss) in receivers to achieve low power (8 mW for single channel and 12.4 mW for multi-channel) and high gain (55 dB for single channel and 62-dB for multi-channel). One three-stage low-noise amplifier employs high- Q passive matchings. A double-layer-stacked inductor is utilized for matching in the single-channel receiver and a high-impedance transmission line is utilized for matching in the multi-channel receiver, respectively. In addition, one new modified Cherry-Hooper amplifier is applied for the variable-gain amplifier design to achieve high gain-bandwidth product and high power efficiency. The single-channel receiver is implemented with 0.34- mm2 chip area. It is measured with a power consumption of 8 mW, a minimum single-sideband noise figure (NF) of 4.9 dB, a 3-dB bandwidth of 3.5 GHz, and a maximum conversion gain of 55 dB. The multi-channel receiver is implemented with 0.56- mm2 chip area. It is measured with a power consumption of 12.4 mW, a 3-dB bandwidth of 8 GHz (59.5 ~ 67.5 GHz), and a maximum conversion gain of 62 dB. The measurement results show that the two demonstrated 60-GHz direct-conversion receivers can achieve high gain and low NF with ultra-low power in 65-nm CMOS.

Development of a Low-power Consumption Cryogenic MMIC LNA for Immediate Connection with an SIS Mixer

0.5-8.5 GHz Cryogenic Low Power Consumption Amplifiers for Superconducting SIS Mixer-based Water Vapour Radiometer Applications

Development of a Low-Power Cryogenic MMIC HEMT Amplifier for Heterodyne Array Receiver Application

Cryogenic Modeling of GaAs-pHEMT and its Application in Low-power MMIC CLNA Design for Radio Astronomy

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

A Cryogenic Sige Low Noise Amplifier Developed for Radio Astronomy

Design And Fabrication Of Cryogenic Low Noise Amplifier In Low Rf Band

An SIS-mixer-based Amplifier for Multi-Pixel Heterodyne Receivers

Development of cryogenically-cooled low noise amplifier for mobile base station receivers

0.75ghz-1.75ghz Sige Lna For Cryogenic Application

A Compact 500ghz SIS Receiver Developed for Space Observations

Characteristics Of Low Noise 800mhz Amplifier At Cryogenic Temperature

A 47K Noise Temperature CMOS S-band LNA for Cryogenic Applications

A 2.1–2.5 GHz high linearity and low noise down-conversion active mixer

A 0.32 $\times$ 0.12 mm$^{2}$ Cryogenic BiCMOS 0.1–8.8 GHz Low Noise Amplifier Achieving 4 K Noise Temperature for SNWD Readout

Cryogenic Low Noise Amplifier for VHF Band Applied in Superconducting Filter

A 2.4ghz Low Power Highly Linear Mixer For Direct-Conversion Receivers

Design of Ultra-Low-Power 60-Ghz Direct-Conversion Receivers in 65-Nm CMOS

A DESIGN OF Ku-BAND CRYOGENIC LOW-NOISE AMPLIFIER

Design and Measurement of P Band Cryogenic Low Noise Step Amplifier

A LOW POWER, HIGH-LINEARITY CMOS DOWNCONVERSION FOLDED MIXER FOR 2.4GHz ISM BAND APPLICATIONS