Abstract:To realize active optics and further adaptive optics, high precision positioning technology with nanometer's resolution is believed to play a vitally important role in driving segmented mirrors of very large astronomical telescope (VLAT). The positioning actuators based on hydraulic technology, flexible-hinge principle and motor-reducer approach have been generally employed in VLAT to date. But such actuators prove to have the drawbacks such as hydraulic leakage, lagging, backlash and insufficient stroke, which could hardly be avoided in application of the above mentioned technologies. Naturally, these actuators can not satisfy the high-precise-positioning requirement for active and adaptive optics in VLAT. Aiming at upgrading the performance of actuators in VLAT, this paper presents the conceptual design of a small giant-magnetostrictive actuator which features stable nano-resolution positioning, large stroke, and instant response, high load capacity and free from backlash. Based on inchworm moving principle, the current research focuses on developing the elongating mechanism for longer step displacement with nanometric resolution and the clamping mechanism for large driving force. The feasibility of attaining a target actuator with 1000 microstrains and 4 nanometers resolution has been promised by relative experiments upon a phi 7x2O mm Terfenol-D rod in the authors' previous researches. Besides, the design of clamping mechanism as the other focus adopts magnetostrictive method to generate remarkable clamping force and to enable self-locking/pre-clamping behavior as well, which the other clamping methods are most unlikely to achieve. The current research is expected to contribute to meet the needs of high precision positioning for active and adaptive optics in VLAT.

Concentric-Tube-Eccentric-Rod: a Continuum Actuator for Macro-/Micro-Scale Translational Actuation

A Novel 2-DOF Piezoelectric Stick-Slip Actuator With Parallel Guiding Decoupling

Realization of Two-Axis Macro-Micro Dual-Driven System

A Compact 2-DOF Micro/Nano Manipulator Using Single Miniature Piezoelectric Tube Actuator.

Modeling and Simulation of a Micro-Actuator with Long-Travel

Design of a Rhombus-Type Stick-Slip Actuator with Two Driving Modes for Micropositioning

Design and Analysis of a Yoshimura Continuum Actuator

Giant-Amplitude, High-Work Density Microactuators with Phase Transition Activated Nanolayer Bimorphs

A novel macro-fiber-composite stick-slip actuator with large single-step displacements

Introduction of a novel longitudinal-flexural-torsional actuator using a magnetostrictive rod

Millimeter-Scale Soft Continuum Robots for Large-Angle and High-Precision Manipulation by Hybrid Actuation

A Large-Stroke Reluctance-Actuated Nanopositioner: Compliant Compensator for Enhanced Linearity and Precision Motion Control

Application Study On Giant-Magneostrictive Actuator For Driving Segmented Mirrors Of Very Large Astronomical Telescope

A Piezoelectric and Electromagnetic Dual Mechanism Multimodal Linear Actuator for Generating Macro- and Nanomotion

Bidirectional Micro-Actuators Based on Eccentric Coaxial Composite Oxide Nanofiber

Amplifying transmission and compact suspension for a low-profile, large-displacement piezoelectric actuator

Design and Experimental Investigation of Three Degrees of Freedom Nanoscale Microsuspension Actuators

Large-stroke and high-precision coaxial integrated macro-micro composite actuator based on VCM and GMA

Design and Simulation of a Macro-Micro Dual-Drive High Acceleration Precision XY-stage for IC Bonding Technology

Design of the Film Actuator Based on Bridge-Type Mechanism

Piezoelectric-Thermal Coupling Driven Biomimetic Stick-Slip Bidirectional Rotary Actuator for Nanomanipulation.