Abstract:Piezoelectric materials have been widely applied in actuation and sensing device for Structural Health Monitoring (SHM). Composite materials are taking a more and more important role in load-bearing components due to their high-strength, lowweight properties in aerospace engineering. By distributing piezoelectric properties throughout the composite structural component, each location of the material can be used as an actuator and a sensor to generate and receive ultrasonic waves. This enables the construction of dense interrogation probe arrays for active and high-resolution structural sensing. This paper presents the virtual time-reversal tomography for impact damage detection in self-sensing piezoelectric composite plates. A systematic numerical investigation of ultrasonic guided-wave dynamics in anisotropic piezoelectric composite plates is first conducted. The guided wave generation mechanism and characteristics are studied using the harmonic analysis of a finite element model simulating the tuning procedure. Subsequently, an impact damage is introduced and modelled as a group of cone shape delaminations and stiffness losses within the laminate layers through the thickness direction, so as to approximate the practical impact damage. 3D transient dynamic coupled-field finite element models are further adopted to simulate the procedure of guided wave generation, propagation, interaction with the impact damage, and reception in a piezoelectric composite laminate. The contact dynamics are considered to capture the possible nonlinear interactions between guided waves and the impact damage, which would induce Contact Acoustic Nonlinearity (CAN) into the guided waves. Furthermore, the wave damage interaction coefficients (WDICs) are adopted to depict the scattering patterns of guided waves, from which the sensitive wave-path directions can be inferred for active sensing array design. Finally, the predictive simulation signals from the 3D finite element models are fed into the virtual time-reversal probabilistic tomography algorithm to locate and image the impact damage zones. This paper finishes with summary, concluding remarks, and suggestions for future work.

Developing 3D-CMUT for Ultrasonic Guided Wave-based Damage Imaging Applications: a Comprehensive Theory and Simulation Study

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Design and Finite Element Simulation of a Novel 3D-CMUT Device for Simultaneous Sensing of In-Plane and Out-of-Plane Displacements of Ultrasonic Guided Waves

Ultrasonic Full Guided Wavefield for Damage Detection in Curved CFRP Parts

Ultrasonic Guided Wave Based Damage Imaging by Time-Reversal Method in Frequency-Wavenumber Domain

Damage Area Evaluation Using a New and Simple Signal-Processing Algorithm in the Ultrasonic Wave Propagation Visualization Technique

FEM-based Analysis on Sensing Out-of-plane Displacements of Low-Order Lamb Wave Modes by CMUTs

The 4th International Conference on Structural Health Monitoring and Integrity Management Virtual Time-reversal Tomography for Impact Damage Detection in Self-sensing Piezoelectric Composite Plates

Multi-time Lamb waves space wavenumber imaging method based on ultrasonic-guided wavefield

A Method of the CMUT Array Design and Imaging Simulation Based on MATLAB

Baseline-Free Damage Diagnostic Imaging Approach Relying on the Extraction of Converted Modes of Ultrasonic Guided Waves

An Efficient Algorithm Embedded in an Ultrasonic Visualization Technique for Damage Inspection Using the AE Sensor Excitation Method.

Modeling and Optimization of CMUTs Arrays for Improved Transmission and Reception Performance in Immersion

Damage identification for plate-like structures using ultrasonic guided wave based on improved MUSIC method

Ultrasonic Guided Wave Based Horizontal Crack Imaging in Metal Plate by Local Wavenumber Analysis

Air-coupled capacitive micromachined transducer array for non-contact Lamb wave detection

Ultrasonic guided wave tomography for damage detection in harsh environment

An Efficient Damage Quantification Method for Cylindrical Structures Enhanced by a Dry-Point-Contact Torsional-Wave Transducer

3D Cone-Beam Breast Ultrasonic Tomography Imaging for Capacitive Micromachined Ultrasonic Transducer Cylindrical Array.

Lamb Waves and Electro-Mechanical Impedance Based Damage Detection Using a Mobile PZT Transducer Set.

Impact Damage Imaging and Quantification in Composite Structures Utilizing Nonlinear Ultrasonics Measured by Scanning Laser Doppler Vibrometry