Abstract:In this article, a feasibility study for the visualization of hidden damage using an integrated high-speed camera system was carried out. A thin, planar, and low-modulus high-density polyethylene plate with surrogate damage was chosen to represent a damaged structure for the proof of concept, and two different damage scenarios (mimicked by attaching lightweight rectangular/circular masses to the back of the plate) were investigated. The acoustic/ultrasonic guided waves were generated in the plate by a surface-mounted piezoelectric actuator under continuous sinusoidal excitation, and in-plane wavefield displacements on the surface of the plate were captured using a high-speed camera. In order to reconstruct the scattered wavefield, these in-plane wavefields which primarily include the fundamental symmetric wave mode S 0 and fundamental shear horizontal wave mode SH 0 (induced due to reflection/scattering of the incident S 0 wave mode from the damage and plate boundaries) were then extracted using digital image correlation image analysis software. All the experimental parameters (e.g. material properties of the plate, excitation frequency, selection of lens, field-of-view, speckle size) were carefully designed, integrated, and optimized. In order to overcome the current hardware limitations (insufficient spatial/temporal resolution), sample interleaving was implemented to artificially enhance the frame rate and image stitching techniques were used to increase the total effective camera resolution. Together, these techniques provided a nearly 250-fold enhancement in the data acquisition capability of the high-speed camera. In order to fully demonstrate the efficacy of the sample interleaving technique, two frequencies were excited: 14 and 28 kHz, below and above the original Nyquist frequency, respectively. The first fundamental SH 0 and S 0 wave modes for both frequencies were successfully detected and identified, and the disturbances at the damage region were clearly observed in the scattered wavefield reconstructed with the SH 0 mode in particular, as the SH 0 mode has a shorter wavelength making it better suited for detecting smaller damage. The hidden damage was then visualized by employing a modified version of the phase-based damage imaging condition, wavenumber index, that was previously developed for visualizing hidden delamination damage in composites with a laser Doppler vibrometer scanning system.

Damage Area Evaluation Using a New and Simple Signal-Processing Algorithm in the Ultrasonic Wave Propagation Visualization Technique

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Ultrasonic Guided Wave-Based Circumferential Scanning of Plates Using a Synthetic Aperture Focusing Technique

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Ultrasonic Full Guided Wavefield for Damage Detection in Curved CFRP Parts

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Nondestructive Testing Method Based on Lamb Waves for Localization and Extent of Damage

ULTRASONIC LAMB WAVES APPLIED IN NONDESTRACTIVE DAMAGE EVALUATION

Damage assessment using the Lamb wave factorization method

Noncontact Damage Topography Reconstruction by Wavenumber Domain Analysis Based on Air-Coupled Ultrasound and Full-Field Laser Vibrometer

Detection and localization of closely distributed damages via lamb wave sparse reconstruction

Multi-time Lamb waves space wavenumber imaging method based on ultrasonic-guided wavefield

Damage Identification Method Based on Ultrasonic Guided Wave Sensor Network and Path Optimization Bayesian Fusion Algorithm

Baseline-free damage visualization using noncontact laser nonlinear ultrasonics and state space geometrical changes

Health monitoring of plate structures based on tomography with combination of guided wave transmission and reflection

Multi-frequency instantaneous wavenumber damage imaging method based on ultrasonic guided waves induced by laser point-by-point excitation

Application of Damage Detection of Metal Structure Lamb Wave Modal Superposition Imaging Based on Scanning Laser Vibration Measurement

Damage imaging using non-contact air-coupled transducer/laser Doppler vibrometer system

Visualization of hidden damage from scattered wavefield reconstructed using an integrated high-speed camera system