Abstract:Structural Health Monitoring, Ahead of Print. Ultrasonic-guided waves full wavefield scanning technology can realize non-destructive testing with non-contact. The damage detection method based on ultrasonic-guided waves' full wavefield data is widely used in thin-walled plate structures. The defect imaging method based on full wavefield data faces the challenge of simultaneously obtaining the defect contour and thickness direction information. Based on the ultrasonic-guided waves full wavefield scanning detection technology, this paper proposes a multi-time Lamb waves space wavenumber imaging method. In this method, the analytic signal of Lamb wavefield at each moment is constructed by Hilbert transform, and the phase unwrapping is carried out by amplitude sorting and multi-clustering method. Then the wavenumber information is obtained by calculating the phase gradient. The wavenumber at different times of each measurement point is arranged in descending order, and the median wavenumber is extracted as the wavenumber at each measurement point. Based on the dispersion relationship of the tested specimen, the quantitative detection of the plate thickness in the detection area is realized. This method is first applied to the simulation model. Then it is applied to the defect imaging and quantitative detection of aluminum plates with rectangular groove defects and carbon fiber reinforced plastics (CFRP) plates with delamination defects. In simulation and experiment, the local wavenumber imaging method, the frequency domain instantaneous wavenumber imaging method, and the multi-time Lamb waves space wavenumber imaging method are used for defect imaging and quantification. The imaging results are compared and analyzed. The result shows that the multi-time Lamb waves space wavenumber imaging method can restore the morphology of groove defects in aluminum plates and delamination defects in CFRP plates, and accurately estimate the depth of groove defects and the location of delamination defects.

Ultrasonic Guided Wave Based Horizontal Crack Imaging in Metal Plate by Local Wavenumber Analysis

Numerical Study for Surface-breaking Crack Detection on A Cylinder Using Laser-generated Ultrasound

Reference-free Crack Detection and Localization by Nonlinear Laser Ultrasonic.

A Study of Inner Crack Testing with the Laser Phased Array Method.

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Surface Crack Identification on a Cylinder Using the Signal Enhancement of the Scanning Laser Line Source Method

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Wavefield Imaging of Nonlinear Ultrasonic Lamb Waves for Visualizing Fatigue Micro-Cracks.

Quantitative Detection of Small Crack by Nonlinear Laser Ultrasonics

Multi-time Lamb waves space wavenumber imaging method based on ultrasonic-guided wavefield

Nonlinear Damage Localization in Structures Using Nonlinear Vibration Modulation of Ultrasonic-Guided Waves

Nonlinear ultrasonic detection of partially closed cracks in metal plates using static component of lamb waves

Micro-Crack Detection Of Nonlinear Lamb Wave Propagation In Three-Dimensional Plates With Mixed-Frequency Excitation

FEM Simulation of Nonlinear Lamb Waves for Detecting a Micro-Crack in a Metallic Plate

Numerical Simulation Of Nonlinear Lamb Waves Used In A Thin Plate For Detecting Buried Micro-Cracks

Damage detection in thick plate structures based on ultrasonic SH wave

Microcrack Localization Using Nonlinear Lamb Waves and Cross-Shaped Sensor Clusters.

Damage identification for plate-like structures using ultrasonic guided wave based on improved MUSIC method

Scattering of the Fundamental Shear Guided Wave From a Surface-Breaking Crack in Plate-Like Structures

A Cross-Scanning Crack Damage Quantitative Monitoring and Imaging Method

Guided Wave Based Crack Detection in the Rivet Hole Using Global Analytical with Local FEM Approach