Abstract:Oxides formed in the combustion process significantly affect the flame retardancy of titanium alloys, however, the evolution mechanism and formation mechanism of the combustion products of 600 degrees C high temperature titanium alloy remain uncertain. Frictional ignition method is employed in this paper to study the combustion behaviors of 600 degrees C high temperature titanium alloy, and the flame retardancy is evaluated according to the friction time, oxygen content and combustion state. In-situ observation of the burning phenomenon at the friction position and morphology after combustion is investigated, and the combustion states can be divided into oxidation stage, ignition stage and extended combustion stage. Further microstructure analysis is conducted subsequently by focus ion beam (FIB) and high resolution transmission electron microscope (HRTEM) to characterize the oxidation products with different valences in different zones of combustion microstructure. Al2O3, Ti2O3 and TiO2 are observed as the main combustion products in the heat-affected zone, melting zone and combustion zone, respectively. Notably, TiO2 is found to be formed by Ti2O3 under the combustion condition, which is different from the TiO2 transformed from the TiO mesophase under oxidation condition. This results in a lax structure composed of spherical Ti2O3 particles and porous Ti matrix in the melting zone. Thermodynamic calculations including Gibbs free energy and decomposition pressure are discussed to explain the evolution mechanisms and formation mechanisms of different oxides. It is revealed that an Al content of 6% is insufficient to form a continuous protective Al2O3 layer at the interface of the melting zone and heat affected zone. The difference in reaction path between TiO2 formed by TiO and by Ti2O3 can be ascribed to the formation of gaseous TiO phase. The sharp increase of TiO vapor pressure at about 1800 K reduces the stability of titanium oxide, thus causing the as-formed TiO to evaporate rapidly and forcing titanium to transform into TiO2 via a more stable phase, Ti2O3. The formation of the porous structure composed of Ti2O3 and Ti at the melting zone provides a path for the rapid internal diffusion of oxygen, which severely deteriorates the oxygen prevention capability of as-formed oxide layers. Besides, the TiO2 synthesized from Ti-O melt in the combustion zone can hardly protect the inner structure. Therefore, the flame retardancy of 600 degrees C high-temperature titanium alloy is far from satisfactory.

Suppression Characteristic of Three Inhibitors on the Flame Propagation of Titanium Dust Layer

Study on inhibition effect and mechanism of NH4H2PO4 on explosion of titanium powder

Inhibitory Effects of Typical Inert Gases on the Flame Propagation and Structures in TiH2 Dust Clouds

Suppression Effects and Mechanisms of Three Typical Solid Suppressants on Titanium Hydride Dust Explosions

Inhibitory effects of typical inert gases on the flame propagation and structures in TiH 2 dust clouds

Study on the effect and mechanism of Ca(H2PO4)2 and CaCO3 powders on inhibiting the explosion of titanium powder

Study on inhibition of explosion of titanium powder by mesoporous calcium compound/carbonized chelating resin composite powder

Suppression characteristics and mechanisms of solid inhibitors on sawdust explosions in dust transportation systems

Inhibition evaluation of gas inhibitors in micron-sized aluminum dust explosion

Experimental Study of Flame Propagating Behaviors Through Titanium Particle Clouds

Explosion suppression flame and mechanism of energetic dust with distinct morphologies: Aluminum-containing metal as a typical

Effect of powder inhibitors on ignition sensitivity evolution of wood-plastic mixed dust: Based on thermal decomposition behavior and deflagration residues

Inhibiting effect of inhibitors on ignition sensitivity of wood dust

Ignition Sensitivity and Flame Propagation of Titanium Powder Cloud

Inhibiting Effects of Three Phosphates on Coal Spontaneous Combustion

Effects Investigation of Particle Size and Concentration on the Ignition, Explosion Characteristics, and Behavior of Flame Propagation in TC4 Titanium Alloys

Inhibition effect of NH4H2PO4 on explosion flame propagation of aluminum alloy dust cloud

Evolution and Mechanism of Combustion Microstructure of 600 C High Temperature Titanium Alloy

Investigation of the Physical and Chemical Effects of Fire Suppression Powder NaHCO3 Addition on Methane-Air Flames

Inhibition Effectiveness of Trimethyl-Phosphate in Turbulent Nonpremixed Hydrogen-Air Flame

Effects of partial inerting on flame structures of starch dust deflagration in duct