Abstract:Soil fugitive dust pollution caused by urban construction sites is a significant problem. To improve the dust suppression efficiency on the urban construction sites, hydroxypropyl guar (HPG), dodecyl dimethyl amine oxide (OB-2), and hydroxypropyl methylcellulose (HPMC) were selected as individual components of the composite dust suppressant using a single-factor test. The response surface methodology (RSM) was used to determine the optimal mixing proportions. After preparation, the characteristics of the composite dust suppressant were tested. Fourier-transform infrared spectroscopy and scanning electron microscopy (SEM) were used to characterize the composite dust suppressant and explore its mechanism. The results showed that 0.327% HPG, 0.6% OB-2, and 0.5% HPMC were the best compound concentrations. Under optimum conditions, the viscosity of the composite dust suppressant was 151.1 , penetration time was 61.4 s, and water retention rate was 30.67%. Compared with traditional dust control by spraying water, it showed better resistance to evaporation at high temperatures and better wind erosion resistance. The antievaporation rate was 39.42% at 60 °C. After 11 d of continuous wind erosion at level 7, the wind erosion resistance rate was as high as 98.24%. The reason for the excellent dust suppression effect of the composite dust suppressant is that the methyl and hydroxyl groups in the solution diffuse to the surface of the soil fugitive dust particles using Brownian motion and gradually approach the corresponding groups in the soil fugitive dust particles. When the distance between the two reaches 10 , adsorption occurs, causing small dust particles to stick together. Because of the stability of the covalent bonds in the methyl and hydroxyl groups, a stable solidified layer is formed on the soil fugitive dust surface after the evaporation of the composite dust inhibitor solution, thereby avoiding secondary dust. In addition, the composite dust suppressant is noncorrosive and friendly to the construction site environment. Therefore, the composite dust suppressant can effectively reduce soil fugitive dust, alleviate environmental pollution, and provide a reference for preventing and controlling soil fugitive dust on urban construction sites and preparing composite environment-friendly dust suppressants.

Properties and Mechanism Analysis of a Novel Construction Dust Suppressant Based on Polymer Blending

Optimal Preparation and Performance Study of Eco-Friendly Composite Chemical Dust Suppressants: A Case Study in a Construction Site in Chengdu

Study on synthesis of environmentally-friendly polymer dust suppressant based on graft modification

Experimental study on ratio optimization and application of improved bonded dust suppressant based on wetting effect

Preparation and performance evaluation of modified soy protein isolate polymeric dust suppressant using graft copolymerization

Modified sodium alginate-based three-dimensional network hydrogel dust suppressant: Preparation, characterization, and performance

Preparation and Characteristics of Building Dust Suppressants with Strong Resistance to Harsh Environments

Study on characteristics and microscopic mechanism of composite environment-friendly dust suppressant for urban construction site soil fugitive dust based on response surface methodology optimization

Preparation, characterization, and synergistic soil moisture retention effects of a by-product-based dust suppressant for fugitive dust suppression

Local concentration of gel phase domains in supported lipid bilayers under light irradiation in binary mixture of phospholipids doped with dyes for photoinduced activation.

Development of an eco-friendly dust suppressant based on modified pectin: experimental and theoretical investigations

Experimental Study on Dust Suppression Effect and Performance of New Nano-Composite Dust Suppressant

Study on dust pollution law and chemical dust suppression technology of non hard pavement in urban construction sites

Preparation and performance characterization of a new dust suppressant with a cross-linked network structure for use in open-pit coal mines

A green, environment-friendly, high-consolidation-strength composite dust suppressant derived from xanthan gum

Force mechanism analysis of composite microbial dust suppressants based on extracellular polymeric substances (EPS) mode components

Synthesis and performance determination of a glycosylated modified covalent polymer dust suppressant

Preparation and performance analysis of a coking coal dust suppressant spray

Effect of Treatment Methods on Material Properties and Performance of Sawdust-Concrete and Sawdust-Polymer Composites

Synthesis and performance study of biomass-based suppressant and its application in radioactive aerosol sedimentation

Environmentally Friendly Methylcellulose-Based Binders for Active and Passive Dust Control.