Abstract:Soil fugitive dust pollution caused by urban construction sites is a significant problem. To improve the dust suppression efficiency on the urban construction sites, hydroxypropyl guar (HPG), dodecyl dimethyl amine oxide (OB-2), and hydroxypropyl methylcellulose (HPMC) were selected as individual components of the composite dust suppressant using a single-factor test. The response surface methodology (RSM) was used to determine the optimal mixing proportions. After preparation, the characteristics of the composite dust suppressant were tested. Fourier-transform infrared spectroscopy and scanning electron microscopy (SEM) were used to characterize the composite dust suppressant and explore its mechanism. The results showed that 0.327% HPG, 0.6% OB-2, and 0.5% HPMC were the best compound concentrations. Under optimum conditions, the viscosity of the composite dust suppressant was 151.1 , penetration time was 61.4 s, and water retention rate was 30.67%. Compared with traditional dust control by spraying water, it showed better resistance to evaporation at high temperatures and better wind erosion resistance. The antievaporation rate was 39.42% at 60 °C. After 11 d of continuous wind erosion at level 7, the wind erosion resistance rate was as high as 98.24%. The reason for the excellent dust suppression effect of the composite dust suppressant is that the methyl and hydroxyl groups in the solution diffuse to the surface of the soil fugitive dust particles using Brownian motion and gradually approach the corresponding groups in the soil fugitive dust particles. When the distance between the two reaches 10 , adsorption occurs, causing small dust particles to stick together. Because of the stability of the covalent bonds in the methyl and hydroxyl groups, a stable solidified layer is formed on the soil fugitive dust surface after the evaporation of the composite dust inhibitor solution, thereby avoiding secondary dust. In addition, the composite dust suppressant is noncorrosive and friendly to the construction site environment. Therefore, the composite dust suppressant can effectively reduce soil fugitive dust, alleviate environmental pollution, and provide a reference for preventing and controlling soil fugitive dust on urban construction sites and preparing composite environment-friendly dust suppressants.

Preparation, characterization, and synergistic soil moisture retention effects of a by-product-based dust suppressant for fugitive dust suppression

Experimental study on ratio optimization and application of improved bonded dust suppressant based on wetting effect

Optimal Preparation and Performance Study of Eco-Friendly Composite Chemical Dust Suppressants: A Case Study in a Construction Site in Chengdu

Formulation Development and Performance Characterization of Ecological Dust Suppressant for Road Surfaces in Cities

Study on characteristics and microscopic mechanism of composite environment-friendly dust suppressant for urban construction site soil fugitive dust based on response surface methodology optimization

Optimization via response surface methodology of the synthesis of a dust suppressant and its performance characterization for use in open cut coal mines

Preparation and performance characterization of a composite dust suppressant for preventing secondary dust in underground mine roadways

Preparation and performance analysis of a coking coal dust suppressant spray

Development of an eco-friendly dust suppressant based on modified guar gum: Performance and mechanism analysis

Study on synthesis of environmentally-friendly polymer dust suppressant based on graft modification

Properties and Mechanism Analysis of a Novel Construction Dust Suppressant Based on Polymer Blending

Preparation and Performance Analysis of a Spray Dust Suppressant for Coking Coal Dust

Wetting-consolidation type dust suppressant based on sugarcane bagasse as an environmental material: Preparation, characterization and dust suppression mechanism

Experimental Study on Dust Suppression Effect and Performance of New Nano-Composite Dust Suppressant

Experimental and molecular dynamics simulation research on compound dust suppressant based on locust bean gum

Development of an eco-friendly dust suppressant based on modified pectin: experimental and theoretical investigations

Preparation and performance characterization of a new dust suppressant with a cross-linked network structure for use in open-pit coal mines

Study on the microscopic mechanism and optimization of dust suppression by compounding biological surfactants

Performance optimization and mechanism analysis of applied Enteromorpha-based composite dust suppressant

Preparation and performance of a biological dust suppressant based on the synergistic effect of enzyme-induced carbonate precipitation and surfactant

Development and characterization of a high efficiency bio-based rhamnolipid compound dust suppressant for coal dust pollution control